Showing 1–12 of 67 results

RAV30512 Broadband Airborne Communications Antenna | 30 – 512 MHz, Gloss White

$3,800.00
The RAV30512 is a broadband, airborne communications antenna that is designed for airspeeds less than Mach 1. The antenna housing is constructed from a fiberglass epoxy that is designed to withstand exposure to sand and dust particles in desert areas. Extreme temperature changes, humidity, shock and vibration are reduced due to its foam filled core.

RAMI AV-925 Airborne Communications

$3,000.00
The AV-925 antenna was developed to be used with airborne FM transceivers. It is typically used in first responder type aircraft providing a single antenna solution for multiband transceivers. It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies. It is also qualified to perform as a 406 MHz ELT antenna, and is well suited for this function on higher speed, fixed wing aircraft.

AT-1108ARC VHF/UHF Comm Antenna | 116-152 MHz

$2,640.00
The AT-1108ARC Antenna is a combined VHF/UHF airborne communications blade antenna designed for usage airspeeds of less than Mach 1. The antenna housing is fiberglass epoxy, designed to withstand the exposure to sand and dust particles of desert areas and is foam-filled to reduce the effect of extreme temperature changes, extreme humidity, and excessive shock and vibration. The AT-1108ARC is produced to Military Specification MIL-A-55680 and has continuous operation altitudes of up to 50,000 ft and temperatures between -65°F and 131°F. It can withstand the impact shock of 30g and the steady-state acceleration of 6g. The isolation between the bands is > 40 dB. A gasket for RF shielding and positive sealing is included. The antenna is coated with a Skydrol resistant lusterless CARC black paint.

AV-924 FM Antenna | 136-174 MHz, 380-520 MHz, 760-870 MHz

$1,767.87
The AV-924 antenna is designed for use with airborne FM transceivers in first responder type aircraft. This antenna offers an ideal solution for multiband transceivers and covers frequency ranges from 136 to 174 MHz, 380 to 520 MHz, and 760 to 870 MHz. It meets the requirements of DO-160G, section 8, Category U for robust vibration and qualified for helicopter installations with unknown related rotor frequencies.

RAMI AV-924HS Airborne Communications | Special Use

$1,700.00
The AV-924HS antenna was developed to be used with airborne FM transceivers typically used in first responder type aircraft providing a single antenna solution for the multiband transceivers. This antenna operates at VHF and UHF frequencies. It meets DO-160G, section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies. The AV-924HS meets the environmental requirements for flight speeds up to Mach 1 and supersedes the AV-924 part number. It is the same form, fit and function.

ANTENNA/Receive only VHF Marker Beacon, used on on both fixed wing and rotary wing aircraft, white, Skydrol resistant polyurethane paint, operating temperature: -40 degrees Fahrenheit to 160 degrees Fahrenheit, 75 MHz, 50 Ohms

$1,650.00
The AT-640A/ARN Antenna is a receive-only VHF Marker Beacon antenna used on both fixed-wing and rotary-wing aircraft. The antenna meets the requirements of Military Specification MIL-A-5999 for electrical and environmental performance. Finished with a white Skydrol resistant polyurethane paint in accordance with Military Specification MIL-C-81773.

ANTENNA/Military Airborne communications for fixed wing aircraft, operating temperature range: -65 degrees Fahrenheit to 257 degrees Fahrenheit, 225-400HZ, 50 Ohms, N female connector, 55 Mpa.

$1,528.85
The AT-256A/ARC Antenna is used for airborne communications on various fixed-wing and rotary-wing aircraft. The antenna is produced to Military Specifications MIL-A-5815 and MIL-A-5815/1. The antenna is designed to operate at the extreme temperature range of -65°F to 257°F with intermittent operation at 302°F and can withstand a static load of 8 psi perpendicular to the blade, with an ultimate of 12 psi. The antenna is protected by an anodic coating to prevent corrosion and the outside surfaces will resist particular erosion up to Mach 0.95.

AT-741B/B Identification Beacon Antenna | 960-1220 MHz

$990.00
The AT-741B/B antenna is designed for use with Radar Interrogation. Constructed from an aluminum casting provides protection from particle erosion of speeds of up to Mach 2. This antenna is produced to Military Specifications MIL-DTL-25708 and is qualified environmentally to Military Standard MIL-STD-810. The AT-741/B/B can withstand a static load of 15 psi perpendicular to the blade, operate at altitudes of 100,000 ft, and has a Skydrol resistant lusterless CARC black coating.

RAMI AV-701 General Aviation ELT Antenna

$900.00
This general aviation antenna is intended for use with an ELT (Emergency Locator Transmitter). It is a passive single port three frequency aircraft blade antenna, designed for high speed aircraft. The circuit Board Housing is made from Polycarbonate. This antenna operates at VHF and UHF frequencies.

RAMI AV-289 General Aviation | Cellular, L-Band, WiFi Antenna

$899.00
The AV-289 is a broadband blade type antenna for application such as Transponder, Cellular, 4G, GSM, PCS, WIFI, and UMTS. It is also FAA qualified as a transponder antenna.  The antenna housing is constructed of a Polyarylamide Plastic shell and the base is 6061-T6 aluminum with a chemical conversion coating per  MIL-C-5541.  The antenna is supplied with an o-ring and mounting hardware.  The antenna is designed to operate at speeds up to Mach 1 and altitudes up to 55,000 feet. This antenna has Dual-Band, L-Band, and Wideband capabilities.

RAMI AV-931 Diplexer

$675.75
The AV-931 Diplexer can be used with airborne multi-band FM transceivers. The device is designed to provide two separate frequency band ports (typically going to a multi-band transceiver) from a single port multi band antenna.

RAMI AV-930 Diplexer

$575.00
The AV-930 diplexer can be used with airborne multiband FM transceivers. The device is designed to provide two separate frequency band ports (typically going to a multiband transceiver) from a single port multiband antenna.