Category – Avionics – Accessories
SCI Faceplate
Sport 200 and Sport 200S Faceplate
Adapts Sport 200 and Sport 200 S Intercoms to standard 2.25 inch round instrument hole.
Part Number: 900117
Select options
This product has multiple variants. The options may be chosen on the product page
Push to Talk Switch — Standard
Headset Tester
iLevil 3 AW Wire Harness
This harness has a DB15 male connector on one side and is open on the other. The leads are labeled and color-coded so you can easily connect them to your airplane. Note: The iLevil AW comes with a DB15 male connector for you to create your own harness. Purchasing this item is not necessary if you use the connector included in the box.
What's included?
- Power
- Ground
- Battery switch
- Aux 0 TX
- Aux 0 RX
Select options
This product has multiple variants. The options may be chosen on the product page
Remote ADS-B antenna
This antenna is helpful when installing the iLevil SW with a line-of-sight to ground stations is not possible or where living in an area where ADS-B reception is poor. It has a suction cup for ease of installations and a 48" extension cable
Note: This antenna is included with the iLevil AW purchase.
iLevil SW ADS-B Replacement Antenna
WAAS GPS Antenna
AHRS G-micro
The AHRS-G micro is a standalone, embedded attitude and heading reference system. With its small form factor and low power consumption, the AHRS-G micro is perfect for portable or panel-mounted devices such as navigation displays that integrate flight instrumentation (i.e attitude indicators, multi-function displays). This inertial measurement unit is also being used in non-aviation related fields to provide leveling references and rate of turns for other equipment. Like all our products, every G-micro undergoes a strict calibration process before leaving the manufacturer for reliable operation at different temperature levels and vibration frequencies. In the simplest configuration, the hardware requires only three connections (PWR, TX, GND).The module can also be powered and data accessed through the micro-USB port for easy troubleshooting.
iLevil SW and Sport Harness
This harness connects your iLevil SW or iLevil Sport to external devices with serial output. This serial harness fits perfectly the Zaon XRX box and others with a DB9 plug. This harness enables data from external devices to be transmitted wirelessly by the iLevil to a mobile device.
Note: This harness fits the iLevil SW and Sport only! The AW uses custom wiring, thus a harness is not provided. If you have an iLevil Model No 10-SW, please select the appropriate harness above. Otherwise, select Default option.
Select options
This product has multiple variants. The options may be chosen on the product page
iFly GPS Serial Harness
This harness connects your iLevil SW or iLevil Sport to the IFly GPS with serial output. This harness enables data from the iFly GPS to be transmitted wirelessly by the iLevil to a mobile device.
Note: This harness fits the iLevil SW and Sport only! The AW uses custom wiring, thus a harness is not provided.
You will need to purchase a harness that connects from the iFly GPS to the iLevil Serial Harness. This harness is sold by iFly GPS/Adventure Pilot.
D5 • Gimbal
The D5•Gimbal is our largest configured Drone Bag. It combines a CS5, a Pocket Cap Front, and the Pack Cap Rear. The Pack Cap rear allows the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time.
NOTE: This price DOES NOT INCLUDE ANY FOAM. This bag is configured with no foam. The only Drone Foam that is intended for this bag is the one for the Autel Evo 2. So be sure to add that foam to your cart as well.
P4 • Shutter
The P4 • Shutter is a pretty darn amazing camera bag. It's a really good compact size. The included Camera Divider Kit stores, protects, and organized your camera, lenses and accessories. And then you still have all the great pockets to organize all the small stuff.
This configuration comes with the Camera Divider Kit.
A key feature is the Top Access which lets you grab your camera right off the top without opening the whole bag. And the ability to customize and add on to the bag as you see fit, truly gives you your own perfect camera bag.
Flat Cap Front
This an identical, but OPPOSITE, version of the the FLAT CAP REAR. It is intended to go onto the FRONT surface of any module.
This will only be useful for people who want a Flat Cap on both the Front AND the Rear of their configuration, thus resulting in a nice slim, clean surface on both sides of the bag.
MOLLE Cap Rear
