Category – Avionics – Accessories
Fuel Flow Transducer | 7-160 GPH, Hall Effect, Right-Angle Pick-up
This fuel flow transducer mounts to the engine fuel line and produces electrical signals that represent the fuel flow. The transducer body has hydraulic fittings that connect directly to the engines fuel line, and a small turbine wheel mounted inside with two precision ball bearings driven by the flowing fuel which incorporate a small magnet that is picked-up by a hall-effect sensor. Transducers based on hall effect technology can operate over a broader range of flow rates and in high temperature environments. This transducer also includes an integrated RTD temperature sensor.
1-2 week lead time most likely
Contact Cost Aero at 855-500-3044 for pricing
CC250 dual secondary 400Hz Transformer
FAA-PMA Magneto Noise Filter
This magneto noise filter will suppress EMI-RFI (popping) noise with our FAA-PMA approved ignition noise filter. It easily connects to the primary P-Lead and grounds at the magneto metal twist cap and magneto body. The Magneto Filter is a feed through design with self healing film capacitor technology that greatly increases the ability to filter and extends the reliability of the filter.
Plastic Converter Connector Kit with Solder Cup | 5 Pin, 10 A
This Plastic Converter Connector Kit with Solder Cup is a plastic connector hood with a back-shell, 4-40 hardware and 25 Pin d-sub and 5 high current (10 Amp) pins. Designed for the LS03-05003 converter line the kit is a ruggedized connector back-shell that will protect the dc converter, db connector and pins from airborne harsh environments.
CONVERTER CABLE/4 PIN PROBE
32 OUTPUT CURRENT LIMITER/28VDC INPUT/25VDC OUTPUT
FREQUENCY CHANGER/1000 VA, 3 phase, 50 to 60 Hz
FREQUENCY CHANGER/750 VA, 60 Hz to 400 Hz
