Category – Avionics – Antennas
CI 292-1 VHF Whip Antenna | 118-137 MHz, BNC
The CI 292-1 is specifically designed to be mount on top of the aircraft while providing excellent omni-directional coverage for all VHF communication frequencies. The CI 292-1 features a straight, tapered stainless steel radiator. This antenna has been updated to meet RTCA DO-160D environmental requirements while offering frequencies from 118 MHz to 137 MHz associated with DO 186 MOPS.
RAMI AV-300 ELT Communication
The AV-300 ELT antenna is intended for use with a 406 MHz ELT (Emergency Locator Transmitter) for General Aviation. It is a passive three frequency fiberglass rod whip antenna, designed for low speed aircraft (up to 350 knots). It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown rotor frequencies.
CI 273 RADIOPHONE STUB ANTENNA/BNC Connector, 403-512 MHz, 50 Ohms, 50 Watts, Airspeed 250 Knots
The CI 273 is a UHF radiotelephone stub antenna has its electrical performance specified over the frequency range of 403 MHz to 512 MHz in various band segments. It is also designed to withstand the environment associated with the underside of an aircraft. The antenna radiator is mechanically captivated and seated against leakage. All exposed metal surfaces are nickel-plated for corrosion resistance and long service.
CI 106 UHF RADIOTELEPHONE ANTENNA/BNC Female Connector, 450-470 MHz, 50 Ohms, 50 Watts, Airspeed 250 Knots
CI 105-11 DME Transponder Antenna
The CI 105-11 is a broadband and rugged antenna designed for DME or transponder use. The antenna assembly is encased in a glass reinforced polyester molded shell and has a standard two stud mounting configuration. It includes a TNC connector and covers 960 MHz to 1220 MHz frequencies and is rated to 400 Knots TAS at 25,000 feet.
RAMI AV-535 Bent Whip Antenna | FM Extended Band
CI 1125 VOR GS DUAL DIPLEXER/BNC Female Connector, 108-118 MHz and 329-335 MHz, 50 Ohms, 2 Hole Mount & a Aluminum Finish.
VHF Communications Antenna | 118-137 MHz, 4-Bolt Mount, BNC Female Connector, Gloss Black
The AV-10 VHF communications antenna is designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base. The antenna essentially matches the styling of the communication antenna currently used on most single and light twins. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 feet. It has a drag force of 2.70 lbs @ 250 mph. This antenna is a direct replacement for the CI 121.
This antenna comes in gloss black.
CI 271 UHF ANTENNA/BNC Female Connector, 400-430 MHz, 50 Ohms, 50 Watts, Airspeed 250 Knots
CI-502 Antenna Coupler | Dual VOR, BNC
RAMI AV-12 VOR/LOC/GS Receive Only Antenna
The AV-12 is a VOR/LOC/GS receive only antenna which uses a highly efficient technique of molding the elements directly into a high-impact thermo-setting bakelite center insulator. The stainless steel elements are ground to close tolerances to provide a low profile. The antenna is designed to operate at both UHF and VHF frequencies, speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.92 lb @ 250 mph.
RAMI AV-100 ELT Antenna
This airborne antenna is intended for use with an ELT (Emergency Locator Transmitter) for general aviation. It has a passive two frequency wire whip, designed for low speed aircraft (up to 250 knots). This antenna operates at VHF and UHF frequencies. It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies.
CI 503 GS ANTENNA COUPLER/BNC Female Connector, 329-335 MHz, 50 Ohms
