Category – Avionics – Antennas
RAMI AV-530 Airborne Communications | VHF
The AV-530 is designed for broadband communications. The antenna has a die-cast aluminum base and a tapered stainless steel whip for less drag at higher airspeeds. It is supplied with a weather-sealing gasket and mounting hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 1.65 lb @ 250 mph. This antenna is a direct replacement for the CI 292-1.
RAMI AV-571 Antenna Accessories | Diplexer, Splitter
RAMI AV-586 Antenna Accessories | Coupler
The AV-586 antenna coupler is a signal splitter providing two outputs from a single antenna. The necessity of bringing this product forward comes from advancing technology in avionics. Newer designed navigational radios have only one antenna input to receive all three (VOR/LOC/GS) signals whereas older legacy radios had a separate antenna input for the VOR/LOC signal and another antenna input for the GS signal.
In an aircraft instrument panel with two newer navigational radios the AV-586 is the article that will provide the necessary signals to both radios utilizing a single antenna.
RAMI AV-5 Base Station | VHF
The AV-5 is an economical Ground Plane base station antenna for general aviation. It is ideally suited for use with Unicom transceivers and is field tunable to optimize VSWR at desired frequency. Durably constructed of high quality materials for a long operational life, the antenna is designed to withstand wind speeds up to 100 mph.
RAMI AV-585 Antenna Accessories | Diplexer, Splitter
RAMI AV-569 Marker Beacon | VHF
The AV-569 is a boat type marker beacon antenna designed for very low drag. It is constructed of an acrylonitrile-styrene- acrylic (ASA) shell with the internal parts encapsulated in rigid urethane foam for mechanical and electrical stability. The white color allows maximum performance without losses due to color pigments or unseen dirt. It is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.20 lb @ 250 mph.
ANTENNA/Blade type, broadband, for use with transponder or DME application, 760-1220 MHz, 50 Ohms, vertical polarization, BNC Female Connector, 2 Hole Mount & a White Finish
RAMI AV-61 Aviation L-Band and Transponder Antenna
The AV-61 is a broadband blade type antenna for DME, Transponder, ATCRBS/MODES, TCAS & TAS. The antenna housing is constructed of anacrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It operates at 960-1220 MHz and it has a drag force of 0.09lbs @ 250 mph. This antenna is a direct replacement for Honeywell’s KA61.
RAMI AV-3 Ground Vehicular | VHF Communications
The AV-3 is a general aviation, low profile, snap-in mounting quarterwave antenna for use on ground vehicles. It has a solderless cable connection at the antenna and is supplied with 17 ft. of cable and a PL-529 connector. The antenna is field tunable by simply cutting the whip to the required length.
RAMI AV-200(-B) Airborne ELT
AV-74-1 ANTENNA/Blade type, broadband, for use with transponder or DME application, 960-1220 MHz, 50 Ohms, vertical polarization, BNC Female Connector, 2 Hole Mount & a Gloss White Finish
RAMI AV-64 Marker Beacon
The AV-64 is a boat type marker beacon antenna designed for very low drag. It is constructed of an acrylonitrite-styrene-acrylic (ASA) shell with the internal parts encapsulated in rigid urethane foam for mechanical and electrical stability. The white color allows for maximum performance without losses due to color pigments or unseen dirt.
The antenna is supplied with cellular neoprene mounting pad and hardware.
The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.22 lbs @ 250 mph. This antenna is a direct replacement for the CI 102.
RAMI AV-200 Airborne ELT
The AV-200 ELT antenna is intended for use with a 406 MHz ELT (Emergency Locator Transmitter) for General Aviation. It is a passive two frequency wire whip, designed for low speed aircraft (up to 250 knots). It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies.
Coaxial Power Splitter/Combiner | BNC with Bracket
The ZFSC-2-1B is a coaxial power splitter/ combiner for VHF/UHF, instrumentation, and communication systems. This part comes with a bracket and BNC connectors. This splitter/combiner features wideband 5 MHz to 500 MHz frequency range, low insertion loss, excellent isolation, good VSWR of 1:2:1, and a rugged shielded case. Includes the bracket option.
RAMI AV-74(-1) Transponder/DME
The AV-74(-1) is a broadband blade type antenna for transponder or DME application. The antenna has longer mounting studs for thicker mounting locations. Its housing is constructed of anacrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.09 lbs @ 250 mph. This antenna is a direct replacement for the CI 105-16.
