Category – Avionics – Antennas
Coaxial Power Splitter/Combiner | BNC with Bracket
The ZFSC-2-1B is a coaxial power splitter/ combiner for VHF/UHF, instrumentation, and communication systems. This part comes with a bracket and BNC connectors. This splitter/combiner features wideband 5 MHz to 500 MHz frequency range, low insertion loss, excellent isolation, good VSWR of 1:2:1, and a rugged shielded case. Includes the bracket option.
A tariff fee of $2.6190 EA may apply.
RAMI AV-61 Aviation L-Band and Transponder Antenna
The AV-61 is a broadband blade type antenna for DME, Transponder, ATCRBS/MODES, TCAS & TAS. The antenna housing is constructed of anacrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It operates at 960-1220 MHz and it has a drag force of 0.09lbs @ 250 mph. This antenna is a direct replacement for Honeywell’s KA61.
RAMI AV-64 Marker Beacon
The AV-64 is a boat type marker beacon antenna designed for very low drag. It is constructed of an acrylonitrite-styrene-acrylic (ASA) shell with the internal parts encapsulated in rigid urethane foam for mechanical and electrical stability. The white color allows for maximum performance without losses due to color pigments or unseen dirt.
The antenna is supplied with cellular neoprene mounting pad and hardware.
The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.22 lbs @ 250 mph. This antenna is a direct replacement for the CI 102.
RAMI AV-200 Airborne ELT
The AV-200 ELT antenna is intended for use with a 406 MHz ELT (Emergency Locator Transmitter) for General Aviation. It is a passive two frequency wire whip, designed for low speed aircraft (up to 250 knots). It has met DO-160G, Section 8, Category U requirements for robust vibration and is qualified for installation on helicopters with unknown related rotor frequencies.
RAMI AV-74(-1) Transponder/DME
The AV-74(-1) is a broadband blade type antenna for transponder or DME application. The antenna has longer mounting studs for thicker mounting locations. Its housing is constructed of anacrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.09 lbs @ 250 mph. This antenna is a direct replacement for the CI 105-16.
RAMI AV-575 Marker Beacon Antenna Splitter
RAMI AV-570 Antenna Accessories | Diplexer
K220C Communication Antenna | 30 inch Whip & 17 inch Cable
CI 101 TRANSPONDER STUB ANTENNA/BNC Female Connector, 1030-1090 MHz, 50 Ohms, Airspeed 300 Knots, & a Tin-Nickel Alloy Finish
The CI 101 is a top loaded stub, monopole, transponder antenna with a mechanically captivated radiator machined from solid brass for impact resistance. Contact power are made from beryllium copper, and metallic parts are plated with bright nickel for corrosion protection. The CI-101 mounts through a single 0.6-inch diameter hole.
RAMI AV-547 VOR/LOC (Receive Only) | Splitter
The AV-547 splitter feeds two navigation receivers from one antenna. The matching circuitry is enclosed in a durable, light weight aluminum housing for superior mechanical and environmental stability. The splitter operates at altitudes of up to 50,000 ft. This product is a direct replacement for the CI 502.
K220A Com Whip Antenna | Magnetic Mount, 118-136 MHz
104-17 Monopole Transponder Antenna | 978 MHz
The 104-17 transponder antenna is a mono-pole antenna that has a top loaded sphere which creates a factor of reliability and safety for a shorter antenna. This antenna offers a voltage standing wave ratio of 1.7:1 at 978 MHz when connected with a 50Ω coaxial transmission line. The 104 series antennas feature an omni-directional, vertical-polarize radiation pattern when mounted to the underside of the aircraft.
RAMI AV-534L Airborne Communications | VHF
The AV-534L is a heavy-duty stainless steel quarterwave VHF communications antenna. It is manufactured with a durable type stainless steel whip and large stress-relieved ferrule and comes complete with porcelain insulators and mounting hardware. The antenna is designed to operate at speeds of up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.56 lb @ 250 mph. An 8 foot transmission line with connectors is also supplied.
