Category – Avionics – Antennas
DM N27 Marker Beacon Antenna | 74.75–75.25MHz, BNC
The N27 series marker beacon antennas are rugged, lightweight antennas for the reception of 75 MHz marker beacon signals.
These low-drag antennas are designed for simple external mounting and require no cutting of airframe structural members. The largest hole required in the skin is for the connector. Moisture proofing is assured by the dielectric foam filled, white polyester-fiberglass radomes. These skydrol resistant housings are fitted with metal leading edges for erosion protection. The DM N27 antennas are designed to meet the performance specifications of antennas AT-134 and AT-536.
SLANT ANTENNA FOR KRA10A
Glidescope Antenna
The 37P-4 is designed for use with Glide Slope receivers for reliable performance. The antenna is lightweight and is suitable for mounting either in a radome or externally on the aircraft. The antenna is provided with an adapter plate with an 11"" radius for mounting on rounded fuselages. The antenna has an ""N"" Type Female Connector and is finished with a chemical film coating per Military Specification MIL-C-5541, Class 1A for maximum corrosion protection in a salt-laden atmosphere.
Vehicular Antenna | SATCOM | Tan
The RAMI8711 is an extremely rugged UHF SATCOM antenna with Right Hand Circularly Polarized (RHCP) designed for tactical vehicles for on the move (OTM) applications. The low profile design reduces interference from overhanging objects and has a low visual signature. The antenna has the frequency coverage to support both Legacy and MUOS UHF communication needs and can cover the entire hemispherical Field of View (FOV) with a single output port which eliminates the need to switch between high and low angles. The antenna has been designed to interface with a standard NATO mount and can be elevated on a riser if needed.
ANTENNA/Radar Interrogation, 1010-1110 MHz, 50 Ohms, C female connector, green, vertical polarization, operating temperature: -65 degrees Fahrenheit to 130 degrees Fahrenheit.
The AT-884B/APX-44 Antenna is a Radar Interrogation antenna designed to receive vertically polarized signals at 1010-1030 MHz and radiate vertically polarized signals at 1010-1110 MHz. This antenna is constructed for capability of functioning during all normal maneuvers of the aircraft at all azimuth headings in respect to any radial to the interrogating radar location. The antenna is produced to the requirements of Military Specification MIL-T-55046. The antenna has an operating temperature range of -65 F to 130 F, an operating altitude of up to 30,000 ft, and is constructed to meet the environmental requirements of Military Specification MIL-E-5400. The antenna's outside surfaces are protected with a chemical resistant CARC green coating.
DM N48-8 VOR/LOC Balanced Loop Antenna | 108MHz–118MHz
The DM N48 LOC/VOR balanced loop antenna ensures a omni-directional radiation pattern at the horizon. This provides for maximum signal for standard VHF omnidirectional radio range localizer and navigation systems installed in lightweight aircraft, medium twin engine aircraft, and helicopters operating up to 250 MPH.
Contact Cost Aero at 855-500-3044 for pricing
Antenna Cable | for DM N4-4 Antenna System
DM NI70-3 DME/ATC Transponder Antenna | 950MHz–1220MHz, 6-Hole Mount, Type C Female Connector
The NI70 L-Band transponder antenna provides sufficient bandwidth for DME and ATC frequencies on civil aviation aircraft. It will provide omni-directional, vertically polarized coverage when installed on the top or the bottom of an aircraft. To reduce drag, this antenna features an aerodynamic designed structure that consists of a single metal element.
Contact Cost Aero at 855-500-3044 for pricing
