Category – Avionics – Antennas
DM NI50 DME/ATC L-Band Antenna | 960MHz – 1,220MHz, 6-hole, Type N Male Connector, Light Grey
The DM NI50 reduces maintenance costs due to its low profile, all-metal blade that provides unequalled mechanical strength and reliability. The NI50 antennas are engineered for use on business, commercial, and military aircraft. NI50 DME antennas can be used will all standard L-Band equipment operating on the 960 MHz to 1,220 MHz frequency band. These antennas are interchangeable with with virtually all L-band blade, flush mountable antennas currently in service on commercial and military aircraft.
110-337 Blade Antenna
Select options
This product has multiple variants. The options may be chosen on the product page
CI 2680-216 Combo Blade Antenna | VHF, XM Weather, BNC/TNC
PN19 Radio Altimeter Antenna | 4,200M–4,400MHz, ARINC 707
The PN19-1-1 uses micro strip technology to provide an extremely low-profile antenna. This fully functional antenna was developed to be a high quality, low-cost, lightweight, and near conformal antenna. The dielectric insert and radiating elements are recessed into a complete four-sided metal housing. This design feature protects the dielectric surface from the airstream for increased erosion protection in addition to preventing water intrusion and delamination.
CI 295-300 SAR TRI BAND ANTENNA/White, 136-174 MHz and 380-520 MHz and 764-870 MHz, Single Port
The CI 295-300 tri-band, single-port, airborne SAR antenna is designed to provide frequency coverage to Search and Rescue teams using Motorola’s APX® architecture. For maximum effectiveness and connectivity, the CI 295-300 operates within P25 standards. This blade antenna is rated for helicopter and fixed-wing turbine powered jet installations in the toughest vibration environments. The single-port design reduces installation time and saves space — providing room on the aircraft for other mission critical antennas or equipment vital to search and rescue operations.
DM H23-1 Antenna Coupler | Dual VOR, Single GS, BNC Connector
The H23-1 dual VOR and single GS triplexer permits operation of two NAV and one glides slope receiver from one VOR/GS antenna. The unit is housed in an aluminum case and all circuit components fully encapsulated for vibration protection as well as waterproof protection.
- Instrument landing system redundant couplers
- Minimum insertion loss
DM H24-1 Antenna Coupler | Dual GS, BNC Connector
The H24-1 Dual Glide Slope Diplexer allows operation of two glide slope receivers from one glide slope antenna. The unit is housed in an aluminum case and all circuit components fully encapsulated for vibration protection as well as waterproof protection.
- Instrument landing system redundant couplers
- Minimum insertion loss
CI 429-410 ComDat Antenna | WAAS GPS/XM
The CI 429-410 is a WAAS GPS/XM antenna that is qualified under TSO C190 WAAS GPS requirement and will operate with any DO-301 qualified WAAS GPS system providing full Gamma 2 & 3 and LPV capabilities. The CI 429-410 is manufactured with a Skydrol resistant resistant radome and nickel-plated, aluminum base plate and comes standard with a nitrile O-ring for positive seal against the aircraft skin.
110-338 Tri-Band ELT Rod Antenna | 121.5/243/406MHz, White
NI50-2-2 DME/ATC L-Band Antenna | 960MHz – 1,220MHz, Type C Male Connector, Gloss White
The NI50 Series are low-profile, all-metal, L-band blade antennas built for mechanical strength and reliability for business, commercial, and military aircraft. The design of these antennas provide extremely high, side load strength, sealed construction against the intrusion of moisture, and lightening protection to prevent damage to electronic equipment.
CI 295-200 Dual Port SAR Blade Antenna | 136-174 MHz, 380-520 MHz
The CI 295-200 public service antenna provides the frequency coverage required to Search and Rescue teams around the world. The dual port design offers maximum effectiveness and flexibility allowing users to connect any radio set required for every mission. This blade antenna is rated for helicopter installations in the toughest vibration environments. It incorporates a dual band and dual port design reducing installation time and saving space — providing room on the aircraft for other antennas or equipment vital to search and rescue operations. Applications include helicopters and wing turbine powered aircraft.
CI 295-250 SAR Dual-Band and Dual-Port Blade Antenna / 136 – 174 MHz & 764 – 870 MHz / White
The CI-295-250 public service antenna provides the frequency coverage required to Search and Rescue teams around the world. The dual port design offers maximum effectiveness and flexibility allowing users to connect any radio set required for every mission. The CI 295 is a blade antenna rated for helicopter installations in the toughest vibration environments. It incorporates a dual band and dual port design reducing installation time and saving space — providing room on the aircraft for other antennas or equipment vital to search and rescue operations.
