Category – Avionics – Electrical
6434000-1 Frequency Converter
ADF RECEIVER SYNC BEARING TO A-429 CONVERTER + False
Converter | Analog to ARINC 429 (AAC)
A-429 HS/LS to Serial Converter
A-429 HS/LS TO SERIAL CONVERTER W/SM SEL/OUTPUTS RS-232 or RS-422 SERIAL.
Synchro to ARINC 429 HS Converter
This Synchro to ARINC 429 HS Converter (933800-24) is a general purpose converter, which can be used whenever Synchro to ARINC 429 High speed conversion is required. It can receive three 3-wire Synchro ARINC 407 inputs: pitch, roll and magnetic heading. The received labels are then converted to ARINC 429 high speed. The output labels are: 320 (Magnetic Heading), 324 (Pitch) and 325 (Roll). This converter also receives 3 discreet flag inputs which are used to enable or disable the output of ARINC 429 labels associated with roll (325), pitch (324) and magnetic heading (320).
Logic Converter Unit | Type 7-163PIN160
The 7-163PIN160 Logic Converter Unit (LCU) takes frequency information from the radio and matches the performance of the antenna to that frequency. The LCU terminates and validates the control signals from the radio, extracts the frequency information, translates it to a tuning command, and provides the required drive signals to tune the antenna via the parallel bus at the output connector.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
DC POWER CONVERTER/DC to regulated and controllable DC power converter, 37.5 watt. Input: 28 VDC, Output: 37.5 W, 0-5 VDC. TSO’d
The LT-48B is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
FREQUENCY CONVERTER/Lightweight, 2000 VA, 115 VAC, 400 Hz
The HS200 & HB200 are highly efficient, lightweight AC frequency power converters. These models utilize the latest state of the art solid state circuitry to convert a 115/200 Vac, 400 Hz, 3 PH input to 115 Vac, 60 Hz or 230 Vac, 50 Hz sine wave output.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
DC to DC Voltage Converter | 28-14 VDC, 24A
The N2412-24 DC/DC voltage converter offers high-efficiency converting, stepping down an input voltage of 28-14 VDC to a highly regulated output voltage of 13.8 VDC. These converters provide no isolation between their input and output negative terminals and are designed for FM transceivers and other applications requiring a 12V power source converted from a 24V negative ground battery.
DC POWER CONVERTER/DC to regulated and volt controlled DC power converter, 50-100 watt. 28 Vdc to reg 0-28 Vdc, 3.6 ADC
The LT-103 is a pulse width-modulated DC to DC converters that provide regulated power. These converters transform an unregulated 28 VDC to a regulated and adjustable DC output via a remote control voltage; 0 to 28 VDC.
The LT-103 is used to control the light intensity of incandescent bulbs in aircraft instrument lighting when voltage control is required.
DC POWER CONVERTER/DC to regulated and controllable DC power converter, 37.5 watt. Input: 28 VDC, Output: 37.5 W, 0-5 VDC.
The LT-48 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.
The LT-48 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-48 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
DC POWER CONVERTER/DC to regulated and controllable DC power converter, 50 watt. Input: 28 VDC, Output: 70 W, 0-28 VDC. TSO’d
The LT-45 is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.
The LT-45 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-45 are qualified to the FAA technical standards order (TSO-C71) for airborne static DC-DC electrical power converters.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
E/L PANEL INVERTER/AC to AC E/L panel power converter, 350 VA, 115 V, 400 Hz
The FD15 is a pulse width modulated AC to AC power converter that provides regulated 0 to 115 VAC, 400 Hz power up to 1.3 Amps for EL panel lighting. The FD15 powers 750 to 1,000 square inches of a EL panel and the output voltage is controlled by an external 10k potentiometer at a 1/2 watt to ground or directly from a 0 to 5 VDC voltage source applied to pin E. An internal trim pot is provided to adjust the voltage 10% at its full clockwise position of the external pot. Circuit protection includes low input voltage shutdown, soft start, high input voltage shutdown, output over limit, and open short circuit current limit
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
