Category – Avionics – Electrical

The FD15 is a pulse width modulated AC to AC power converter that provides regulated 0 to 115 VAC, 400 Hz power up to 1.3 Amps for EL panel lighting. The FD15 powers 750 to 1,000 square inches of a EL panel and the output voltage is controlled by an external 10k potentiometer at a 1/2 watt to ground or directly from a 0 to 5 VDC voltage source applied to pin E. An internal trim pot is provided to adjust the voltage 10% at its full clockwise position of the external pot. Circuit protection includes low input voltage shutdown, soft start, high input voltage shutdown, output over limit, and open short circuit current limit

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

The FJ20 from KGS is a pulse width modulated AC to AC power inverted that provides regulated 0 to 5 VAC at 400 Hz power up to 40 amps. The output voltage is controlled by a 0 - 5 Vdc slider voltage applied at pin M from a 10k potentiometer 1/2 watt to ground or directly from a 0 - 5 VDC source.

The SC100 is a lightweight, 400 Hz static inverter that uses state-of-the-art, solid state circuitry to invert a 28 VDC input to a 115 VAC, 400 Hz sine wave output. The SC100 unit is primary designed to power airborne and ground instruments, compasses, gyros, radar, and navigation equipment.

The SPC-5( ) Series static inverter utilizes solid state circuitry to convert 28 VDC to 115 VAC, 400 Hz sine wave power. Design features include pulse-width modulated square to sine wave power conversion permitting light weight and reliable operation. The SPC-5( ) Series are capable of delivering an overload of 150% of rated current for a duration not less than five minutes under all environmental conditions.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing