Category – Hardware – All
3.5mm Audio Cable for smartPanel Docks with Inline Resistor (Open Wiring) – 6 Foot
6 FT - 3.5mm Audio Cable / 4-wire Open Wiring Termination with Inline Resistor
To connect your smartPanel Mount to your audio panel to allow music / multimedia to be played through your intercom system or to allow your iPad or iPhone to be used as a recording device, you will need to add a 3.5mm audio cable to your panel mount. These cables have been designed to perfectly fit the built-in smartPanel Mount audio port position.
This audio cable is a straight open-wiring audio cable with an inline components to prevent feedback when wired to the audio panel.
Cable Apple MFI Cert. Lightning 0.4M (1.3Ft) 4-Wires Solder Termination Black
Designed to fit smartPower power supplies 150-301.
Apple approved lighting cable open 4 wire used to connect to smartPower 150-301 power supplies to assure your iPad or iPhone remain powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The open wiring termination allows these cables to be installed directly behind on a smartPower 150-301 series USB power supplies.
Cable Apple MFi Cert. Lightning to USB-A Male 1.1M (3.6Ft) Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Male used to connect to smartPower 150/250 power supplies to assure your iPad or iPhone remains powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Cable Apple MFi Cert. Lightning to USB-A Male 0.4M (1.3Ft) Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Male 0.4M (0.8') used to connect to smartPower 150/250 power supplies to assure your iPad or iPhone remains powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Cable Panel Mount USB-A Female 1.1M (3.6Ft) 4-Wires Solder Terminations Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Female used to connect to smartPower 150/250 power supplies. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Cable 90 degrees USB-C to USB-A 1.1M (3.6 Ft) Black
90°(Degrees) cable USB-C to USB-A used on iPad 11” and 12” pro series.
- USB3.0 male to USB 3.1
- Type C male 90°(degrees) upward or downward right angle cable.
- Data Sync and Charge. Reversible plug orientation and Cable direction. Plug and Play.
- Super Speed USB 3.1 transfer rates, backwards compatible with existing USB 3.0 and USB 2.0 devices
- Length: 1.1 meter / 3.6 feet
Cable 90 Degree USB-C 1.1M(3.6 Ft) 4-wires solder Termination Black
90°(Degrees) cable USB-C to 4-wires solder termination used on iPad 11” and 12” pro series.
- Type C male 90°(degrees) upward or downward right angle cable.
- Data Sync and Charge. Reversible plug orientation and Cable direction. Plug and Play.
- Super Speed USB 3.1 transfer rates
- Length: 1.1 meter / 3.6 feet
BOM Inspection Panel Mount
ICOM Headset Adapter Cable
3-Pin 12-28V Aircraft External Power Plug Quick Connect Cable
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
