Category – Hardware – Cables
JetPROP Adapter – Gray (SAE2-6319G1A)
Adapts the BatteryMINDer’s SAE plug to a gray Anderson SB50 to plug for one of the two Concorde batteries in the Piper Malibu/Mirage where it has been converted to a JetPROP PT6 turboprop by Rocket Engineering, Spokane, WA. A separate BatteryMINDer is recommended for each battery, so typically each aircraft requires two of these adapters.
Battery Charger 24V Output Cable (802-686)
Battery charger output cable with strain relief handle and ambient temperature sensor. One included with BatteryMINDer Ground Power Units.
Designed to connect an integral GPU BatteryMINDer to standard SB-50 external battery charging receptacle. The Model 670-420 SB50 Handle encases the red Anderson SB50 power plug to provide a rugged hand grip for temporary DC power applications such as battery charging. Its ABS plastic case features internal wiring guides for strain relief.
SB50 12V Aircraft External Power Extension Cable (802-864)
6ft. SB50 aircraft external power extension cable (included with select ground power units).
Designed to connect a Ground Power Unit to another SB-50 external power receptacle found on experimental aircraft. It can also be used as an extension cord for any 12/14V ground power unit. Rugged polycarbonate shell, assembled with stainless steel hardware. Torch-soldered heavy-duty copper contacts with silver plating. Up to 0 AWG wire. 50% more power handling. Up to 1600A peak.
3-Pin 12V Aircraft External Power Cable (802-866)
6ft. AN2551 3-Pin aircraft external power cable (included with M1435 ground power units).
Designed to connect a Ground Power Unit to standard AN2552 external 12V power receptacle found on experimental aircraft. Rugged polycarbonate shell, assembled with stainless steel hardware. Torch-soldered heavy-duty copper contacts with silver plating. Up to 0 AWG wire. 50% more power handling. Up to 1600A peak.
3-pin 24V Aircraft External Power Cable (802-868)
6ft. AN2551 3-Pin aircraft external power cable (included with M2827 ground power units).
Designed to connect an M2827 Ground Power Unit to a standard AN2552 external power receptacle found on experimental aircraft. Rugged polycarbonate shell, assembled with stainless steel hardware. Torch-soldered heavy-duty copper contacts with silver plating. Up to 0 AWG wire. 50% more power handling. Up to 1600A peak.
AC Power Input Cable (801-468)
Aircraft Jumper Cable (802-689B)
AC Power Input Cable (801-468)
AC Power Input Cable (801-192)
Cable ATD/ACD to AC-1/AT-2 (3ft)
Cable ATD/ACD to AC-1/AT-2 (10ft)
Cable ACD-57 to Becker Radios (3ft)
Interface cable to connect a Becker AR/RT-6201 VHF Radio to an ACD-57. Includes interface converter circuitry
Features
- D-SUB 15HD Connector and backshell for ACD-57, preconfigured.
- D-SUB 25 connector on the Becker side.
- Includes interface converter circuitry.
Compatible with: ACD-57 Becker AR-6201, Becker RT-6201
Cable ATD/ACD to AC-1/AT-2 (16ft)
Cable ACD-57 or ATD-57/80/11 to RS-232 third-party devices (10ft)
Interface cable to connect uAvionix Tailbeacon X or TQ KRT-2 units to an ACD-57 or other traffic systems to ATD.
Features
- D-SUB 15HD Connector and backshell for ACD/ATD, preconfigured.
- Open ends on the RS-232 third-party unit's side
Compatible with: ACD-57, ATD-57, ATD-80, ATD-11 Tailbeacon X, KRT-2, many RS-232 / GDL-90 traffic systems
Cable ACD-57 to ACD-57 (3ft)
