RAMI AV-929 Diplexer
CI 292-2 VHF Bent Whip Antenna | 118-137 MHz, BNC, 50W
The CI 292-2 is specifically designed to be mounted on the bottom of helicopters or underneath fixed-wing aircraft while providing excellent omni-directional coverage for all VHF communication frequencies. The CI 292-2 features a stainless steel, bent whip radiator. This antenna has been updated to meet RTCA DO-160D environmental requirements while offering frequencies from 118 MHz to 137 MHz associated with DO 186 MOPS.
CI 109 VHF Rod Antenna | 118-137 MHz, BNC
RAMI AVT-4 Airborne Communications | VHF
The AVT-4 is a broad-band VHF communications antenna. It incorporates a low drag blade housing design for high strength and a radiating element encapsulated in rigid polyurethane foam. The housing is finished with a Skydrol resistant white polyurethane paint and comes with mounting hardware and neoprene mounting pad. The antenna is designed to operate at speeds up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.85 lb. @ 250 mph.
CI 120-5 VOR GS POWER COMBINER/BNC Female Connector, 108-118 MHz and 329-335 MHz, 50 Ohms
The CI 120 series VOR/GS power combiners are either a two-input and one output, or two input and two output power combiner designed for the CI 120G/S blade set. It combines VOR/LOC and GS signals from individual blades and are typacally used with one or two coaxial cable runs to feed NAV1 or NAV2 receivers.
DM H23-1 Antenna Coupler | Dual VOR, Single GS, BNC Connector
The H23-1 dual VOR and single GS triplexer permits operation of two NAV and one glides slope receiver from one VOR/GS antenna. The unit is housed in an aluminum case and all circuit components fully encapsulated for vibration protection as well as waterproof protection.
- Instrument landing system redundant couplers
- Minimum insertion loss
RAMI AV-402 Airborne ELT Antenna
CI 306 UHF ANTENNA/BNC Female Connector, 800-870 MHz, 50 Ohms, 50 Watts, Airspeed 250 Knots
VOR GS POWER COMBINER/BNC Female Connector, 108-118 MHz and 329-335 MHz, 50 Ohms
The CI 120 series VOR/GS power combiners are either a two-input and one output, or two input and two output power combiner designed for the CI 120G/S blade set. It combines VOR/LOC and GS signals from individual blades and are typacally used with one or two coaxial cable runs to feed NAV1 or NAV2 receivers.
