RemoteFlo Fuel Flow Transducer Installation Kit | Robinson R66
Fuel Flow Transducer 201B
The Fuel Flow Transducer measures flows of hydrocarbon fuels such as gasoline, kerosene, and #2 diesel fuel and other light transmitting, non-corrosive liquids of similar viscosity. Typical fuel flow applications include aircraft fuel monitoring systems; gasoline, diesel, and gas turbine engine test stands; and industrial furnaces.
The transducers give repeatable signals on gasoline across a 100 to 1 flow range down to 0.3 GPH. The higher viscosity of diesel fuel reduces signal repeatability at flow rates below 2 GPH. Pressure drops are very low compared to other turbine flow transducers. The transducer bearing system is rated for continuous operation at the upper end of the flow range.
The transducers produce a current pulse signal from an opto-electronic pickup with a preamplifier.
FT-90 Fuel Flow Transducer
FT-60 Fuel Flow Transducer
DIGIFLO-L/SINGLE/LITERS/IF
TRANSDUCER/70GPH W/RA PICK-UP
10-70 GPH Fuel Flow Transducer with Right Angle Pick-up. These transducers are made of stainless steel and meet all FAA requirements for installation in the engine compartment without additional heat or flame shielding. These transducers have excellent linearity and immunity from viscosity variation due to fuel temperature variation and low locked rotor pressure drop.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
TRANSDUCER 200GPH W/COIL TOP/ST PICK UP
The transducer is a device that converts the mechanical motion of a spinning turbine into an electronic signal that is read by the fuel computer. The magnetic pick-up assembly detects the spinning turbine and counts the revolutions. This produces a series of pulses that is transmitted to the fuel computer. The computer uses the pulse frequency to calculate the fuel flow over time. The Shadin Avionics Company Incorporated-designed fuel flow transducer can be used in conjunction with all of our fuel totalizer units and fuel/airdata computers.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
TRANSDUCER 200GPH/W/RA PICK UP
The transducer is a device that converts the mechanical motion of a spinning turbine into an electronic signal that is read by the fuel computer. The magnetic pick-up assembly detects the spinning turbine and counts the revolutions. This produces a series of pulses that is transmitted to the fuel computer. The computer uses the pulse frequency to calculate the fuel flow over time. The Shadin Avionics Company Incorporated-designed fuel flow transducer can be used in conjunction with all of our fuel totalizer units and fuel/airdata computers.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
