Cable ATD/ACD to AC-1/AT-2 (16ft)
AIR Transponder (AX-1)
AIR Traffic (AT‑1)
AIR Traffic (AT‑1) is a traffic detection system engineered specifically for European airspace, combining FLARM transmitter/receiver, ADS‑B (1090 MHz), and Mode‑S reception into one remotely installable unit. It detects aircraft transmitting FLARM or ADS‑B, and also computes the horizontal/vertical range of Mode‑S targets. Used with compatible displays (e.g. ATD‑57/80), it detects over 90 % of weekend traffic below FL100 in Europe.
ANTENNA/Radar Interrogation, 1010-1110 MHz, 50 Ohms, C female connector, green, vertical polarization, operating temperature: -65 degrees Fahrenheit to 130 degrees Fahrenheit.
The AT-884B/APX-44 Antenna is a Radar Interrogation antenna designed to receive vertically polarized signals at 1010-1030 MHz and radiate vertically polarized signals at 1010-1110 MHz. This antenna is constructed for capability of functioning during all normal maneuvers of the aircraft at all azimuth headings in respect to any radial to the interrogating radar location. The antenna is produced to the requirements of Military Specification MIL-T-55046. The antenna has an operating temperature range of -65 F to 130 F, an operating altitude of up to 30,000 ft, and is constructed to meet the environmental requirements of Military Specification MIL-E-5400. The antenna's outside surfaces are protected with a chemical resistant CARC green coating.
Vehicular Antenna | SATCOM | Tan
The RAMI8711 is an extremely rugged UHF SATCOM antenna with Right Hand Circularly Polarized (RHCP) designed for tactical vehicles for on the move (OTM) applications. The low profile design reduces interference from overhanging objects and has a low visual signature. The antenna has the frequency coverage to support both Legacy and MUOS UHF communication needs and can cover the entire hemispherical Field of View (FOV) with a single output port which eliminates the need to switch between high and low angles. The antenna has been designed to interface with a standard NATO mount and can be elevated on a riser if needed.
Glidescope Antenna
The 37P-4 is designed for use with Glide Slope receivers for reliable performance. The antenna is lightweight and is suitable for mounting either in a radome or externally on the aircraft. The antenna is provided with an adapter plate with an 11"" radius for mounting on rounded fuselages. The antenna has an ""N"" Type Female Connector and is finished with a chemical film coating per Military Specification MIL-C-5541, Class 1A for maximum corrosion protection in a salt-laden atmosphere.
RAV30512B Broadband Antenna | 30-512MHz, 50 Ohms, 50 Watts, TNC female, Black
The RAV30512 is a broadband airborne communications antenna designed for air speeds less than Mach 1. The antenna housing is a fiberglass epoxy design to withstand the exposure to sand and dust particles of desert areas. The antenna is foam filled to reduce the effects of extreme temperature changes, extreme humidity and excessive shock and vibration. It is mechanically and environmentally qualified to MIL-A-55680 (AT-1108) and has continuous operation altitudes of up to 50,000 feet and temperatures between -65º F and 131º F. It can also withstand the impact shock of 30g and the steady-state acceleration of 6g. This antenna has the same mounting pattern and footprint as the AT-1108/ARC for easy interchangeability if needed. A conductive mounting gasket is supplied with this product.
This RAV30512 Broadband Antenna comes in black.
