RAMI AV-587 Antenna Accessories | Diplexer, Splitter
RAMI AV-590 & AV-590(-28) COM Electronic Switch
The AV-590 is an electronic switch allowing two COM radios to share the same COM antenna.
In receive mode, it acts as a signal splitter allowing both COM radios reception across the entire COM band (118-137 MHz).
In transmit mode, which ever COM radio (COM 1 or 2) is selected through the audio panel, a control signal is sent to the AV-590, switching the selected COM radio to the COM antenna and isolating the remaining COM radio from the COM antenna.
Once no longer transmitting, the control signal is removed and the AV-590 electronic switch reverts back to the receive mode as described above.
RAMI AV-6 Cable Assembly
RAMI AV-601 Radar Altimeter
The AV-601 is a radar altimeter antenna specifically designed to meet FAA TSO-C87a specifications. Qualification testing includes meeting the requirements of EUROCAE ED-30, Edition 2, “Minimum Performance Standards for Airborne Low Range Radar Altimeter Equipment,” as modified by Appendix 1 of the TSO.
RAMI AV-61 Aviation L-Band and Transponder Antenna
The AV-61 is a broadband blade type antenna for DME, Transponder, ATCRBS/MODES, TCAS & TAS. The antenna housing is constructed of anacrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It operates at 960-1220 MHz and it has a drag force of 0.09lbs @ 250 mph. This antenna is a direct replacement for Honeywell’s KA61.
RAMI AV-64 Marker Beacon
The AV-64 is a boat type marker beacon antenna designed for very low drag. It is constructed of an acrylonitrite-styrene-acrylic (ASA) shell with the internal parts encapsulated in rigid urethane foam for mechanical and electrical stability. The white color allows for maximum performance without losses due to color pigments or unseen dirt.
The antenna is supplied with cellular neoprene mounting pad and hardware.
The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.22 lbs @ 250 mph. This antenna is a direct replacement for the CI 102.
RAMI AV-701 General Aviation ELT Antenna
This general aviation antenna is intended for use with an ELT (Emergency Locator Transmitter). It is a passive single port three frequency aircraft blade antenna, designed for high speed aircraft. The circuit Board Housing is made from Polycarbonate. This antenna operates at VHF and UHF frequencies.
RAMI AV-74(-1) Transponder/DME
The AV-74(-1) is a broadband blade type antenna for transponder or DME application. The antenna has longer mounting studs for thicker mounting locations. Its housing is constructed of anacrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.09 lbs @ 250 mph. This antenna is a direct replacement for the CI 105-16.
RAMI AV-75
The AV-75 is a broadband blade type antenna for FLARM collision avoidance application. The antenna housing is constructed of anancrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 feet.
RAMI AV-7F & AV-7M Ground Vehicular VHF Communications
The AV-7 is a high performance vehicular antenna for use on all surface vehicles where communications on the aircraft VHF COM frequency band are required. It features heavy duty construction with a tapered 17-7PH stainless steel whip and spring mount. All exposed fittings are chrome-plated brass or stainless steel.
Mounting is easily achieved on rooftop, cowl, fender or other suitable location via a magnetic or fixed “NMO” base. The antenna comes pre-tuned to operate in the aircraft VHF COM frequency band of 118-137 MHz and can be purchased as a complete package or separate antenna and mounting base.
