TIT 7/16-20 Screw in Type Probe
TIT Probe
CRB Probe
OAT Probe
The Outside Air Temperature (OAT) probe has an outside aluminum shield which is used to both hold the probe in place and shield it from radiated heat. When installing the OAT probe, shield the sensor from direct sunlight and engine heat. The OAT probe is installed in the airframe manufactures recommended location, if this information is not available, we recommend installing the probe in clean airflow such as in a cabin air scoop or below the underside of the wing away from engine heat or exhaust heat.
- 1 Thermocouple Type K OAT Probe
- 1-10 Ft. Option Wire
Oil Temp Probe
The OIL Temperature (OIL) probe is for all Lycoming and Continental direct drive engines and is installed in the right (passenger) side front OIL galley by removing the existing 1/8 NPT plug. The probe has a 3/8-24 boss which will fit the factory pre-drilled hole for this probe.
- 1 Thermocouple Type K OIL Temperature Probe
- 1-10 Ft. Option Wire
RAMI AV-3 Ground Vehicular | VHF Communications
The AV-3 is a general aviation, low profile, snap-in mounting quarterwave antenna for use on ground vehicles. It has a solderless cable connection at the antenna and is supplied with 17 ft. of cable and a PL-529 connector. The antenna is field tunable by simply cutting the whip to the required length.
Champion 53164-3 Turbine Engine Lead
CHT Adapter Probe Bayonet
Select options
This product has multiple variants. The options may be chosen on the product page
