4003 KingLite Xenon Dual Filament Lamp Module | for Kinglite 4000 & 4100 Flashlight + False
Standard Multi-Circuit Toggle Switch | 6 pole, On-None-On + False
AIS 240B-35 Switching Module | 28VDC, For MARC 35 + False
The AIS240A-35 is a multi-purpose switching unit, consisting of six, four pole relays for a total of 24 poles of switching capabilities. The relays are arranged in a group of four (16 poles) and two single relays (4 poles each). The relays can be activated by either a ground or 28 Vdc, maximizing installation flexibility. The AIS240A-35 uses gold plated dry contacts that are sealed in nitrogen filled cases.The rugged construction makes them ideal switching units for both fixed wing and helicopter operations.
MODULAR REMOTE SWITCH/14V + False
The RS08/12/16/24 family of remote switches allow large numbers of data or audio lines to be transferred with a single ground logic level. 14 VDC or 28 VDC operation is supported and the RS08 series features automatic ILS reversion logic.
The RS16 series offers the ability to provide switching functions with either voltage or ground keying up to 35,000'. The RS16 features independent ILS reversion logic switch and each 4 pole relay supports a status annunciator for fault monitoring. Dry nitrogen filled, gold contact sealed relays provide dry circuit to 0.5 A switching range.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
RELAY + False
The KA 138 is a navigational switching relay, essentially an electronic switch, for the KNS 660. It can be used for many other applications as well. Through interconnect, this relay can be configured as a single 24-pole double throw relay or dual 12-pole double throw relays.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
SR263 Switching Relay | Two Six-Pole Card for MARC-70 + False
SR 623 Switching Relay | Six Two-Pole Relays
SR64-1 Switching Relay Module | MARC 70, 24 Pole
The SR 64 provides 24 poles of switching through six, hermetically sealed, bifurcated relays. The relays contacts are gold plated and have a 2 amp resistive load rating at 28 VDC. Coil current is 120 mA. K1, K2, K3 and K4 are switched simultaneously through coil pins, 71 and 72. K5 and K6 are independently switched through their coil pins.
SR 54 Switching Module | 20 Pole
The SR 54 switching relay provides 20 poles of switching through five hermetically sealed, bifurcated relays. The SR 54 has a built-in circuit that switches all relays to their de-energized condition whenever K6 is activated. This can be used for such applications as insuring LOC is presented on the HSI whenever a LOC signal is selected.
