SAC 7-35 Air Data Computer | ADS-B for Garmin 400W/500W
Sine Wave Kit
A/D CMPTR W/MON/HIGH RES LTG
AIS-360 ARINC BUFFER/HS to HS/LS to LS
The AIS 360 ARINC Buffer/Isolator (833610-02) has two ARINC 429 inputs and two output channels. Labels received on the ARINC 429 low speed input are sent out on the low speed output; and labels received on the ARINC 429 high speed input are sent out on the ARINC 429 high speed output. The AIS 360 digital platform will convert or combine almost any type of digital avionics signal.
KDC 222 Air Data Computer | Monitor, High IAS Lighting
The KDC 222 Air Data Computer incorporates fours sensors to provide air data and acceleration information to the KCP 220 Flight Computer. The altitude and airspeed sensors are used to tailor the flight control system to the aircraft's response based on airspeed (scheduling).
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
SAC 7-35 Air Data Computer
The SAC7-35 Airdata Computer for General Aviation is actually four systems in one; it provides an altitude encoder, altitude alerting, fuel flow, and air data computer. SAC 7-35 is an FAA TSO approved altitude encoder that provides RS-232 for newer generation transponders as well as standard Gilham Grey code for legacy transponders. The system is also equipped with SANDIA’s altitude inflight monitoring (AIM) that alerts pilots whenever the aircraft deviates 100 feet or more from selected altitude. When paired with a fuel flow transducer, the SAC 7-35 provides all the fuel flow data required for navigation systems to monitor fuel flow. The SAC 7-35 is also a fully TSO’s airdata computer with multiple interface formats that provide data to a wide variety of avionics systems.
SRU 10 Ten Module Enclosure | For MARC70 Interface Modules
12 Pole Switching Module
AIS 200B-35 20 Pole Switching Module
The AIS 200B-35 is a 20-pole, signal level, switching unit designed for use with NAV systems that share the aircrafts HSI/CDIs OBS functions. The contact switching rating is limited by the circuit board track current capacity to 1.0 amp. This unit has a revisionary relay which selects the LOC signal for display on the HSI/CDI whenever a LOC channel is selected in the NAV unit. This unit uses 10 relays in a series/parallel arrangement to provide the same 20 poles of switching. While model AIS 200B-35 is a direct fit and replacement for the AIS 200-35 and AIS 200A-35 models, installation of this AIS 200B-35 remains the same. Operates on 28 VDC.
