AIR Control Display 57 (ACD-57)
2.25" Multi Function Display to control radios and transponders. TSO primary altimeter.
Features
- Perfectly readable TSO-certified multi-function display combining three functions into a compact unit.
- Controls AIR Avionics radios and transponders.
- Controls third-party radios and transponders (optional add-on function, subject to charge)
- Certified primary altimeter (optional add-on function, subject to charge)
- Modular system, directly mounts AIR Com and AIR Transponder units.
AIR COM (AC‑1)
6W 8.33kHz/25kHz TSO VHF COMM Transceiver
Features
- World's smallest and lightest TSO aircraft radio
- Excellent sound and clarity
- 'Say Again' replay function
- Mounts remotely or directly on the ACD-57 Control Head.
- Interfaces to 3rd party systems for control (Flightdecks, Navigators, Apps)
ANTENNA/Radar Interrogation, 1010-1110 MHz, 50 Ohms, C female connector, green, vertical polarization, operating temperature: -65 degrees Fahrenheit to 130 degrees Fahrenheit.
The AT-884B/APX-44 Antenna is a Radar Interrogation antenna designed to receive vertically polarized signals at 1010-1030 MHz and radiate vertically polarized signals at 1010-1110 MHz. This antenna is constructed for capability of functioning during all normal maneuvers of the aircraft at all azimuth headings in respect to any radial to the interrogating radar location. The antenna is produced to the requirements of Military Specification MIL-T-55046. The antenna has an operating temperature range of -65 F to 130 F, an operating altitude of up to 30,000 ft, and is constructed to meet the environmental requirements of Military Specification MIL-E-5400. The antenna's outside surfaces are protected with a chemical resistant CARC green coating.
ANTENNA/Airborne Radar Interrogation (IFF), 960 to 1220 MHz, connector type HN and BNC
The AT-740/A Antenna is used for airborne radar interrogation on various fixed-wing aircraft. The antenna is produced to Military Specification MIL-A-25707 and MIL-A-25707/1. The antenna is designed to operate at the extreme temperature range of -67 F to 302 F. The antenna is a flush-mounted, cavity-back slot antenna constructed of aluminum with a fiberglass radome. The antenna has a type BNC sampling probe and is protected by an anodic coating to prevent corrosion.
Vehicular Antenna | SATCOM | Tan
The RAMI8711 is an extremely rugged UHF SATCOM antenna with Right Hand Circularly Polarized (RHCP) designed for tactical vehicles for on the move (OTM) applications. The low profile design reduces interference from overhanging objects and has a low visual signature. The antenna has the frequency coverage to support both Legacy and MUOS UHF communication needs and can cover the entire hemispherical Field of View (FOV) with a single output port which eliminates the need to switch between high and low angles. The antenna has been designed to interface with a standard NATO mount and can be elevated on a riser if needed.
Blade Antenna | Broadband, 960-1220 MHz | Gloss Black
The AV-74 is a broadband blade type antenna for transponder or DME application. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.09 lbs @ 250 mph. This antenna is a direct replacement for Comant’s model CI-105.
VHF Communications Antenna | 118-137 MHz, 4 Hole Mount, BNC Female Connector, Gloss Black
The AV-17 is designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications. It has a 4-bolt mounting base and is low in profile. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.66 lb @ 250 mph. This antenna is a direct replacement for the CI 122.
This VHF communications antenna has a gloss black finish.
Glidescope Antenna
The 37P-4 is designed for use with Glide Slope receivers for reliable performance. The antenna is lightweight and is suitable for mounting either in a radome or externally on the aircraft. The antenna is provided with an adapter plate with an 11"" radius for mounting on rounded fuselages. The antenna has an ""N"" Type Female Connector and is finished with a chemical film coating per Military Specification MIL-C-5541, Class 1A for maximum corrosion protection in a salt-laden atmosphere.
