Cessna 172/172F GFC 500 Autopilot Hardware Kit
FAA-PMA 70 Amp DC Filter
5TC7 Series Circuit Breaker | 40 Amp Rating
Airman 750 Headset | Single-sided, Dual PJ Connector, 300Ω
58345 Ground Strap Cable | For PSD60-2R Quantity Test Set
Champion Aviation® Turbine Engine Igniter CH34055
RAMI AV-1 Base Station | VHF
The AV-1 is a base station antenna for VHF communications with ground vehicles or aircraft. It has heavy-duty construction with 3/8″ diameter aluminum radials and a 1″ diameter aluminum tube radiator. These elements are treated with a “hexavalent free” passivation process per MIL-81706 and MIL-5541 for superior durability. It mounts easily to a 1″ diameter pipe or a 1-1/4″ O.D. tube with locking set screws. A built-in gap-type lighting arrestor is an important design feature. The antenna operates at a frequency of 118 – 137 MHz, and requires no additional tuning. It is designed to withstand wind speeds of up 100 mph.
Airman 750 Headset | Double-sided, XLR5 connector, 150Ω
ADS-B Out Approved GPS Upgrade
Upgrade your current iLevil2 or iLevil3 unit with an ADS-B out Approved GPS. After your purchase, if you haven't done so already, you will need to send us your past generation unit and we will hold this order until we receive it. Once the unit is received, we will send back your newly upgraded unit.
Additional information on the certified GPS
- GPS source meets the position source performance requirements of §91.227 for ADS-B OUT in the experimental and light sport aircraft market.
- Ability to communicate with currently installed transponders (mode-s), to activate extended squitter, meeting ADS-B mandate for 2020 on experimental and light sport aviation.
AHRS G-micro
The AHRS-G micro is a standalone, embedded attitude and heading reference system. With its small form factor and low power consumption, the AHRS-G micro is perfect for portable or panel-mounted devices such as navigation displays that integrate flight instrumentation (i.e attitude indicators, multi-function displays). This inertial measurement unit is also being used in non-aviation related fields to provide leveling references and rate of turns for other equipment. Like all our products, every G-micro undergoes a strict calibration process before leaving the manufacturer for reliable operation at different temperature levels and vibration frequencies. In the simplest configuration, the hardware requires only three connections (PWR, TX, GND).The module can also be powered and data accessed through the micro-USB port for easy troubleshooting.
