SPC-5(G) Static Inverter | 50VA, 28VDC To 115AC, 400Hz

The SPC-5( ) Series static inverter utilizes solid state circuitry to convert 28 VDC to 115 VAC, 400 Hz sine wave power. Design features include pulse-width modulated square to sine wave power conversion permitting light weight and reliable operation. The SPC-5( ) Series are capable of delivering an overload of 150% of rated current for a duration not less than five minutes under all environmental conditions.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

SC100 Static Inverter / 1000 VA / 28 VDC to 115 VAC / 400 Hz

$9,048.00
The SC100 is a lightweight, 400 Hz static inverter that uses state-of-the-art, solid state circuitry to invert a 28 VDC input to a 115 VAC, 400 Hz sine wave output. The SC100 unit is primary designed to power airborne and ground instruments, compasses, gyros, radar, and navigation equipment.

STATIC INVERTER/1000 VA, 28 VDC to 115 VAC, 60 Hz

The SS series are lightweight, high efficiency static inverters. This model utilizes state of the art, solid state circuitry to invert a 28 VDC input to either a 115 VAC, 60 Hz or 230 VAC, 50 Hz sine wave output. Design features include a crystal-controlled oscillator for output frequency stability and a pulse-width-modulated square to sinewave power conversion scheme for efficient and reliable operation.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

Multi-Volt DC Converter | Single Output, 9-32VDC Input

$449.95
This Multi-volt DC converter is designed to operate lower current devices in a ruggedized airborne environment.  Designed for 12 and 24 volt aircraft systems that need an ultra-small DC converter in various output voltages to power PED devices in aircraft, rotor-craft or military vehicles. It is also FAA-TSO approved and has been tested under DO160G.

TC230 DC-to-DC Step-up Converter | 230 Watt

$1,201.00
The TC230 DC-to-DC Step-up Converter produces 230 watts from an aircraft's 14-volt system for powering 28-volt avionics, instruments, and accessories — including radios, GPS, and electronic equipments. This 230 watt step-up converter is suitable for nearly any common general, business, or commercial aviation applications.

STATIC INVERTER/1000 VA, 28 VDC to 230 VAC, 50 Hz

$6,589.56
The SS series are lightweight, high efficiency static inverters. This model utilizes the latest state of the art, solid state circuitry to invert a 28 Vdc input to either a 115 Vac, 60 Hz or 230 Vac, 50 Hz sine wave output. Design features include a crystal-controlled oscillator for output frequency stability and a pulse-width-modulated square to sine wave power conversion scheme for efficient & reliable operation.

DC POWER CONVERTER/DC to regulated and controllable DC power converter, 50-100 watt. 28 Vdc to 0-28 Vdc, 3.6 ADC

The LT-100 is a pulse width-modulated DC to DC converter that provides regulated DC power. This converter transforms an unregulated 28 VDC to a regulated and adjustable DC voltage output via a remote control potentiometer. The LT-100 is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-100is FAA TSO-C71 recognized for airborne applications.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

DC POWER CONVERTER/DC to regulated and controllable DC power converter, 50 watt. Input: 28 VDC, Output: 100 W, 0-28 VDC, 3.6 amp. MS3106A14S-5S plug. TSO’d

The RG40 is a solid-state, DC to DC switch-mode converter that converts an input DC voltage (27.5 VDC nominal) to a regulated 13.75 VDC output voltage. The RG40 meets the Federal Aviation Administration (FAA) technical standard order TSO-C71 (airborne static DC to DC electrical power converter - for air carrier aircraft). Two or more RG40's may be paralleled (external diodes required) if additional power is required.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

STATIC INVERTER/1200 VA, 28 VDC to 230 VAC, 50 Hz

The SB and SS series static inverters use solid state circuity to invert a 28 VDC input to either 115 VAC, 60 Hz or 230 VAC, 50 Hz sine wave output. Designed with a crystal controlled oscillator for output frequency stability and a pulse width modulated square wave to sine wave power conversion scheme for efficient, reliable, and quiet operation.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

DC POWER CONVERTER/DC to regulated and controllable DC power converter, 50 watt. Input: 28 VDC, Output: 50 W, 13.75 VDC. TSO’d

The LT-46D is a pulse width-modulated DC to DC converter that provides regulated output power. This converter transforms an unregulated 28 VDC to regulated output power. The output voltage is adjusted via a remote control rheostat 5K ohm 1/2 W to ground. Fixed output and voltage control models are also available.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

DC to DC Step Up Converter | 12V to 27.5V, Terminal Connectors, TSO C71

$689.94
This compact and lightweight DC to DC step up converter boasts of an efficiency rating of 90% and has demonstrated reliability in the aviation industry. This third generation DC converter is ideal for applications that require voltage from 14 to 28 volts such as the Bendix King KX-155, KX-165, KY-196A, KY-196B, Motorola VHF/UHF transceivers, and Artex ELT’s.

E/L PANEL INVERTER/AC to AC power converter, 200 VA, 115 VAC 400 Hz to 105 to 125 VAC 400 Hz

$5,869.20
The FJ20 from KGS is a pulse width modulated AC to AC power inverted that provides regulated 0 to 5 VAC at 400 Hz power up to 40 amps. The output voltage is controlled by a 0 - 5 Vdc slider voltage applied at pin M from a 10k potentiometer 1/2 watt to ground or directly from a 0 - 5 VDC source.