CI 200 UHF ANTENNA/BNC Female Connector, 450-470 MHz, 50 Ohms, 30 Watts, 3 Hole Mount, Airspeed 450 Knots
VHF/UHF ELT Antenna | Bent Rod, 121.5, 156.8, & 243MHz
The 21-50-339 is an externally mounted airborne VHF/UHF/ELT (Emergency Locator Transmitter) antenna operating over the maritime and aviation distress frequencies. The radiating element comprises a hard drawn alloy tube inserted into a molded base which contains foamed-in place matching circuits capable of handling up to 25 Watts power. The method of construction provides protection from environmental conditions including vibration, shock and temperature variations.
V/UHF Broadband and UHF SatCOM Antenna | 30-80MHz, 108-152MHz, 240-400MHz
The 19-440-10 V/UHF Broadband and UHF SatCOM Antenna is a combined broadband VHF/UHF communications and UHF satellite communications antenna. The 19-440-10 comprises two orthogonally mounted elements, a circularly polarized turnstile antenna and a vertically polarized broadband fan monopole. Low angle coverage is provided by the vertical element, and high angle coverage is provided by the circularly polarized element. In this way, essentially full hemispheric coverage is achieved for satellite communications.
19-450 UHF And GPS SatCOM Antenna | 240-400MHz, L1-L2
The 19-450 UHF and GPS SatCOM Antenna is a combined UHF satellite communications and Global Positioning System (GPS) antenna. The antenna is low profile in construction and intended for airborne applications. The UHF section provides essentially hemispherical satellite communications coverage. The GPS section provides nominal hemispherical coverage in the GPS L1 and L2 frequency bands to allow reception of microwave signals from a number of satellites.
RAV30512 Broadband Airborne Communications Antenna | 30 – 512 MHz, Gray
The RAV30512 is a broadband, airborne communications antenna that is designed for airspeeds less than Mach 1. The antenna housing is constructed from a fiberglass epoxy that is designed to withstand exposure to sand and dust particles in desert areas. Extreme temperature changes, humidity, shock and vibration are reduced due to its foam filled core.
AT-1108ARC VHF/UHF Comm Antenna | 116-152 MHz
The AT-1108ARC Antenna is a combined VHF/UHF airborne communications blade antenna designed for usage airspeeds of less than Mach 1. The antenna housing is fiberglass epoxy, designed to withstand the exposure to sand and dust particles of desert areas and is foam-filled to reduce the effect of extreme temperature changes, extreme humidity, and excessive shock and vibration. The AT-1108ARC is produced to Military Specification MIL-A-55680 and has continuous operation altitudes of up to 50,000 ft and temperatures between -65°F and 131°F. It can withstand the impact shock of 30g and the steady-state acceleration of 6g. The isolation between the bands is > 40 dB. A gasket for RF shielding and positive sealing is included. The antenna is coated with a Skydrol resistant lusterless CARC black paint.
VHF/UHF Tunable Antenna | 30 – 1220 MHz
VHF/UHF Low Profile Tuned Antenna | 30-88 MHz, 108-174 MHz, 225-400 MHz
VHF/UHF Tunable Antenna | 30-512MHz
The 12-190-160 V/UHF Tunable Antenna is a low profile, tunable, V/UHF blade antenna operating in the frequency band 30 MHz to 512 MHz, and intended for use in general, rotary wing applications. The 12-190-160 meets the stringent requirements of the military and provides unrivaled RF, mechanical and environmental performance. The antenna is configured as two separate radiating structures, fed from a single RF connector.
Type 9-33-26 VHF/UHF Broadband Antenna / 30 MHz – 512 MHz
The 9-33-26P3 VHF/UHF Broadband Antenna is designed to provide communications over the 30 MHz to 512 MHz frequency range for general purpose airborne applications. This VHF/UHF antenna is configured as a broadband fan monopole incorporating a frequency dependent matching network to ensure acceptable VSWR at lower frequencies, while preserving optimum gain at higher frequencies. A susceptance compensation network is included for gain enhancement at lower frequencies. The 9-33-26P3 is composed of a pressure molded composite radome housed within which houses the electrical assembly, and an aluminum alloy baseplate supports a single RF connector.
CI 1085-20-L Multi-Function VHF/L Band Antenna | Dual Port, Edge Protection
The CI-1085-20L is a dual port, multi-function VHF/UHF antenna that uses a popular footprint to contains ATCRBS Mode S transponder/ DME/UAT, ADS-B, and VHF frequencies in one radome and holds no less than five different FAA TSO approvals. This antenna is designed to be used on fixed-wing turbine power aircraft and some light jets.
CI 295-250 SAR Dual-Band and Dual-Port Blade Antenna / 136 – 174 MHz & 764 – 870 MHz / White
The CI-295-250 public service antenna provides the frequency coverage required to Search and Rescue teams around the world. The dual port design offers maximum effectiveness and flexibility allowing users to connect any radio set required for every mission. The CI 295 is a blade antenna rated for helicopter installations in the toughest vibration environments. It incorporates a dual band and dual port design reducing installation time and saving space — providing room on the aircraft for other antennas or equipment vital to search and rescue operations.
