RAMI AV-534L Airborne Communications | VHF
The AV-534L is a heavy-duty stainless steel quarterwave VHF communications antenna. It is manufactured with a durable type stainless steel whip and large stress-relieved ferrule and comes complete with porcelain insulators and mounting hardware. The antenna is designed to operate at speeds of up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.56 lb @ 250 mph. An 8 foot transmission line with connectors is also supplied.
RAMI AV-534 Airborne Communications | VHF
The AV-534 is a heavy-duty stainless steel quarterwave VHF communications antenna. It is manufactured with a durable type stainless steel whip and large stress-relieved ferrule and comes complete with porcelain insulators and mounting hardware. The antenna is designed to operate at speeds of up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.56 lb @ 250 mph.
RAMI AV-530 Airborne Communications | VHF
The AV-530 is designed for broadband communications. The antenna has a die-cast aluminum base and a tapered stainless steel whip for less drag at higher airspeeds. It is supplied with a weather-sealing gasket and mounting hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 1.65 lb @ 250 mph. This antenna is a direct replacement for the CI 292-1.
RAMI AV-17 Airborne Communications | VHF
The AV-17 is a general aviation antenna designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications. It has a 4-bolt mounting base and is low in profile. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.66 lb @ 250 mph. This antenna is a direct replacement for the CI 122.
RAMI AV-6 Cable Assembly
RAMI AV-1FG Base Station | VHF
The AV-1FG is a base station antenna for communications mounted on top of a quick erect fiberglass telescoping mast which can be extended anywhere from approximately 5’ 6” to 27’ tall in 5’ increments. The mast is supplied with guy rings, guy ropes and anchor stakes for security when erected. This kit can be used with Becker Avionics GK615 and GK616 VHF radios.
RAMI AV-5 Base Station | VHF
The AV-5 is an economical Ground Plane base station antenna for general aviation. It is ideally suited for use with Unicom transceivers and is field tunable to optimize VSWR at desired frequency. Durably constructed of high quality materials for a long operational life, the antenna is designed to withstand wind speeds up to 100 mph.
RAMI AV-1 Base Station | VHF
The AV-1 is a base station antenna for VHF communications with ground vehicles or aircraft. It has heavy-duty construction with 3/8″ diameter aluminum radials and a 1″ diameter aluminum tube radiator. These elements are treated with a “hexavalent free” passivation process per MIL-81706 and MIL-5541 for superior durability. It mounts easily to a 1″ diameter pipe or a 1-1/4″ O.D. tube with locking set screws. A built-in gap-type lighting arrestor is an important design feature. The antenna operates at a frequency of 118 – 137 MHz, and requires no additional tuning. It is designed to withstand wind speeds of up 100 mph.
RAMI AV-931 Diplexer
RAMI AV-930 Diplexer
RAMI AV-590 & AV-590(-28) COM Electronic Switch
The AV-590 is an electronic switch allowing two COM radios to share the same COM antenna.
In receive mode, it acts as a signal splitter allowing both COM radios reception across the entire COM band (118-137 MHz).
In transmit mode, which ever COM radio (COM 1 or 2) is selected through the audio panel, a control signal is sent to the AV-590, switching the selected COM radio to the COM antenna and isolating the remaining COM radio from the COM antenna.
Once no longer transmitting, the control signal is removed and the AV-590 electronic switch reverts back to the receive mode as described above.
