5463K722 3/8″ Wye Fitting
$18.40
1- 3/8″ Wye Fitting, PN: 5463K722.
This wye fitting takes the two 1/4″ tubes into a single 3/8″ exit tube for venting capabilities on the ETX900-TSO or ETX900-VNT lithium aircraft batteries. This does not work with the ETX680-24-VNT or the ETX680-24-TSO battery.
1- 3/8″ Wye Fitting, PN: 5463K722.
This wye fitting takes the two 1/4″ tubes into a single 3/8″ exit tube for venting capabilities on the ETX900-TSO or ETX900-VNT lithium aircraft batteries. This does not work with the ETX680-24-VNT or the ETX680-24-TSO battery.
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | EarthX Batteries |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
BB-TH-U Thermal Battery Box “U” Case
Thermal battery box to protect from radiated or convection heat. This battery box is designed to be compatible with our existing “U” case battery models; ETX1600, ETX900-24, ETX680-24-VNT.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. Weight is .68Kg or 1 Lb. 8oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F (60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
ETX-QCC4 EarthX 48″ Quick Connect Cable
SPECIFICATIONS
- Max jump start amps: 400 amps
- Length: Battery “pigtail” cable = 48”/122 cm
- Jump pack adapter cable: 12”/30 cm
- 1/4″ / M6 ringlets
- Industry standard 2-pole SAE connector, with rubber sealing cap.
- Cable max. rating: 400 Amp
When not in use, keep rubber sealing cap closed on the SAE connector end.
You can then use this pigtail to charge your battery or for jump starting.
If the cables get hot, disconnect and allow them to cool down before use.
Caution: Never use the supplied battery chargers pigtail cables that comes with your charger for jump starting as they are not designed to carry this amount of amperage. Only use the EarthX quick connect (model# ETX-QCC4) cables to jump the battery.
ETX-QCC2 24″ EarthX Quick Connect Cables
SPECIFICATIONS
- Max jump start amps: 400 amps
- Length: Battery “pigtail” cable = 24”/60 cm
- Jump pack adapter cable: 6.5”/16.5 cm
- 1/4″ / M6 ringlets
- Industry standard 2-pole SAE connector, with rubber sealing cap.
- Cable max. rating: 400 Amp
When not in use, keep rubber sealing cap closed on the SAE connector end.
You can then use this pigtail to charge your battery or for jump starting.
If the cables get hot, disconnect and allow them to cool down before use.
Caution: Never use the supplied battery chargers pigtail cables that comes with your charger for jump starting as they are not designed to carry this amount of amperage. Only use the EarthX quick connect (model #ETX-QCC2) cables to jump the battery.
Reviews
There are no reviews yet.