Passive Military GPS Splitter | 1 Input, 2 Output, TNC Connector
$948.75
The MIL-LDCBS1X2 military GPS splitter features a one input and two output for splitting RF frequencies from 1.1 GHz — 1.7 GHz. This mil-spec splitter is designed to passively GPS signals within the L-Band to provided multiple devices with GPS signal from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults. All Mil-Spec splitters are qualified to meet the rigorous standards MIL-STD 810F environmental & MIL-STD-461F EMI standards.
This mil-spec GPS splitter features one input & two outputs, and has TNC-type connectors.
Features
- Precise amplitude balance: < 1 dB variation between ports
- Flat group delay: < 1 ns  between L1 & L2 bands
- Low insertion loss: -4.0 dB loss across operating frequencies
- Wide accepted frequency range: covering entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents antenna alarm faults
- Matched phase balance: < 2° variation between ports
- Qualification and test reports available
Specifications
10.2 lb, max.
Dimensions:
1.3 x 3.25 x 2.5 in (without connectors)
Operating Temperature:
-57°C to 87°C
Housing base plate Finish:
Electroless nickel-plated (MIL-C-26074C, class 1)
Frequency Range:
1.1 GHz — 1.7 GHz
Characteristic Impedance:
50Ω
Input SWR:
2.0:1, max.
Output SWR:
2.0:1, max.
Insertion Loss:
-3.0 dB to -5.0 dB (-4.0 dB, typical)
Gain Flatness:
0.25 dB, typical (1.0 dB, max.)
Amplitude Balance:
0.10 dB, typical (1.0 dB, max.)
Phase Balance:
1.0°, typical (2.0°, max.)
Isolation:
L1: 22 dB
L2: 15 dB
Group Delay Flatness:
0.10 ns, typical (1.0 ns, max.)
Connector Option:
TNC-type female
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | GPS Networking |
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally. Â
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more.  Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
iFly GPS Serial Harness
This harness connects your iLevil SW or iLevil Sport to the IFly GPSÂ with serial output. This harness enables data from the iFly GPSÂ to be transmitted wirelessly by the iLevil to a mobile device.
Note: This harness fits the iLevil SW and Sport only! The AW uses custom wiring, thus a harness is not provided.
You will need to purchase a harness that connects from the iFly GPS to the iLevil Serial Harness. This harness is sold by iFly GPS/Adventure Pilot.
