M27500-20TG4T14 Extruded ETFE Tefzel™ Wire | 20 AWG, 4-Conductor
$1.76
SAE AS22759/18 is made of special extruded ETFE insulation covering a tin-plated copper conductor. It is light-weight and provides the mechanical toughness and durability suitable for extreme aerospace, military, and commercial environments. This AS22759 wire has a fluoropolymer–insulation and single-conductor offering high performance and reliability in severe wind and moisture prone (SWAMP) zones such as engine nacelles and areas requiring overload stability, low smoke emission, and fire resistance such as aircraft cabins. Meeting the M27500 specifications, its low voltage and high temperature properties makes this wire & cable ideal for both military and commercial applications — including airframes, avionics, and ground support equipment.
M27500 specifications provide for a wide range of construction options allowing for optimal performance in virtually any environment. Any number of design components are available for users to choose from — including conductor size, number of conductors, insulation type, shield material (or no shield), circuit identification, and single or double walled jacket.
M27500-20TG4T14 Tefzel™ wire meets SAE AS22759/18 specifications and is a 20 gauge, shielded, 4-conductor, ETFE wire. Mil-C M27500 Spec wire & cable.
Features
- Stranded, tin-plated, copper conductor
- Extruded Ethylene tetrafluoroethylene (ETFE) insulation
- Tin-plated, copper-braided shield with 85% coverage
- Thin-walled, Extruded Ethylene tetrafluoroethylene (ETFE) Jacket
- 150°C maximum temperature
- 600 volt rating
Specifications
SAE AS22759/18 SPECIFICATIONS:
Gauge:
20 AWG
Number of Strands:
19
Strand Size:
32
Outside Diameter (Insulation):
0.049 – 0.053 in
Conductor Diameter:
0.038 in
Weight:
4.60 LB/MFT
Impedance (@ 20°C):
9.8 Ω/MFT, maximum
Number of Conductors:
4, (20TG4T14)
Mil-Spec:
M27500
NEMA Type:
WC 27500
Conductor Material:
Tin-plated copper
Insulation Material:
Extruded ethylene tetrafluoroethylene (ETFE)
Shield Material:
Tinned copper braid
Shield Coverage:
85%
Jacket Material:
Extruded ethylene tetrafluoroethylene (ETFE)
Temperature:
150°C, maximum
Voltage Rating:
600 V
SAE Specification:
SAE-AS 22759/18
M27500 SPECIFICATIONS:
Temperature Rating:
Up to 200°C (392°F) depending on the type of construction
Insulator:
(RC-06) – Polytetrafluoroethylene (PTFE)
(RC-09) – Extruded PTFE
(TE-14, TG-14) – Extruded Ethylene Tetrafluoroethylene (ETFE)
Conductor:
(RC-06, RC-09) – Stranded Silver Coated Copper
(TE-14, TG-14) – Stranded Tin Copper
Jacket:
(RC-06) – PTFE Tape
(RC-09)- Extruded FEP (RC-09)
(TE-14, TG-14) – Extruded ETFE
Other Designations:
NEMA WC 27500, SAE AS22759
| Weight | .1 lbs |
|---|---|
| Dimensions | 10 × 8 × 6 in |
| Brand |
EDMO |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
RV-10 Products
Cable Panel Mount USB-A & USB-C Female 1.1M (3.6Ft) 4-Wires Solder Terminations Black
Features:
3.5mm Audio Cable for smartPanel Docks with Inline Resistor (Open Wiring) – 6 Foot
To connect your smartPanel Mount to your audio panel to allow music / multimedia to be played through your intercom system or to allow your iPad or iPhone to be used as a recording device, you will need to add a 3.5mm audio cable to your panel mount. These cables have been designed to perfectly fit the built-in smartPanel Mount audio port position.
This audio cable is a straight open-wiring audio cable with an inline components to prevent feedback when wired to the audio panel.
Reviews
There are no reviews yet.