RAM® Tab-Tite™ with RAM® Twist-Lock™ Suction Cup for Tablets with Cases
$86.99
The RAM-B-166-TAB8U consists of a 3.3″ diameter suction cup twist lock base, double socket arm, round base adapter and Tab-Tite™ universal clamping cradle. The suction cup base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included Tab-Tite™ cradle includes a spring loaded back plate and custom support cups for 10″ screen tablets WITH heavy duty cases. The spring loaded design makes it easy to load and unload your tablet, along with keeping it secure while on the go. Interchangeable cup ends are designed to optimize the functionality of your tablet, allowing access to audio jacks, usb, power, and other ports, your tablet can be used just as it was intended. The Tab-Tite™ cradle is compatible with any tablet that will fit the dimensions listed below. It is important to verify the dimensions of your tablet when determining the overall size.
Specifications
Hardware included:
Assembly Hardware
Holder dimensions:
Height Range: 9″ – 11.5″
Width Range: 6.38″ – 8.31″
Depth Range: .13″ – 1.12″
Suction size:
3.3″ Diameter
Socket to socket length:
3″
Ball size:
B Size (1″)
Weight capacity:
Standard Use: 2 lbs
Heavy-Duty Use: 1 lb
Materials:
Marine-grade aluminum
High strength composite
Packaging type:
Poly Bag
Weight:
1.15 lb
| Weight | .1 lbs |
|---|---|
| Dimensions | 10 × 8 × 6 in |
| Brand | RAM Mounts |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
smartPanel Trim Bezel for Apple iPad Pro 10.5-in Panel Mount
smartPanel Trim Bezel for iPad Pro 10.5-in adds an attractive and useful trim bezel with finger shelves for easier touchscreen use in flight.
A trim bezel is an attractive option for your smartPanel mount for the iPad Pro 10.5-in. Mounted around the exterior of the mount on top of the panel, the trim bezel cleans up any imprecise panel cuts and makes your iPad Pro 10.5-in look even more like installed avionics in your instrument panel. The trim bezel also adds useful finger shelves like many new touchscreen avionics displays to help steady your fingers when using the touchscreen in flight. Installation in your existing mount is quick and simple.
Fan Blower for all smartPanel Mount Products (24-28VDC)
Fan Blower 50X15MM 24-28VDC 2Wires (26AWG)
Guardian Avionics introduces a new 5/8 Fan blower designed to fit all smartPanel Mount units. This includes the iPhone(6+, 7, 7+, 8, 8+), iPad Mini (2,3 and 4), Iapd 9.7 family including Air, iPad Pro 10.5 and iPad Pro 12.9. This new Fan Blower with a mounting bracket is easy to setup and install.
3.5mm Audio Cable for smartPanel Docks with Inline Resistor (Open Wiring) – 6 Foot
6 FT - 3.5mm Audio Cable / 4-wire Open Wiring Termination with Inline Resistor
To connect your smartPanel Mount to your audio panel to allow music / multimedia to be played through your intercom system or to allow your iPad or iPhone to be used as a recording device, you will need to add a 3.5mm audio cable to your panel mount. These cables have been designed to perfectly fit the built-in smartPanel Mount audio port position.
This audio cable is a straight open-wiring audio cable with an inline components to prevent feedback when wired to the audio panel.
Cable Apple MFi Cert. Lightning to USB-A Male 1.1M (3.6Ft) Black
Designed to fit smartPower power supplies 150/250.
Apple approved lighting to USB-A Male used to connect to smartPower 150/250 power supplies to assure your iPad or iPhone remains powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The USB cable can be installed directly on a smartPower 150/250 series USB power supplies.
Cable Apple MFI Cert. Lightning 0.4M (1.3Ft) 4-Wires Solder Termination Black
Designed to fit smartPower power supplies 150-301.
Apple approved lighting cable open 4 wire used to connect to smartPower 150-301 power supplies to assure your iPad or iPhone remain powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The open wiring termination allows these cables to be installed directly behind on a smartPower 150-301 series USB power supplies.
Cable Apple MFi Cert. Lighting 1.1M (3.6Ft) 4-Wires Solder Terminations Black
Designed to fit all smartPower power supplies (150/250).
Apple approved lighting cable open 4 wire used to connect to smartPower 150/250 power supplies to assure your iPad or iPhone remain powered in flight. All our Lightning cables are Apple MFi certified for full compatibility. The open wiring termination allows these cables to be installed directly behind on a smartPower 150/250 series USB power supplies.
Reviews
There are no reviews yet.