F5011 VHF Transceiver | 136-174 MHz, No Display, 8 Channels

The F5011 is a versatile, VHF Transceiver is designed with rugged construction and simple operation. This radio has four programmable buttons and eight channels communication with 2-tone, 5-tone, MDC 1200, CTCSS, and DTCS capabilities as standard to set up customized talk zones. A priority scan mode allows users to monitor one or two priority channels while scanning other channels. The F5011 series built military rugged and tested to MIL-STD 810 F specifications to survive harsh environments and keep on working.

This F5011 VHF Transmitter has no display, 8-channels, and 136 MHz – 174 MHz frequency coverage.

Features

• Simple operation for instant communication
• Built-in 2-Tone, 5-Tone, MDC 1200, CTCSS and DTCS capabilities as standard features
• Built-in MDC 1200 for transmitting a PTT ID and emergency signal and for receiving radio check, stun and revive
• Enhanced scan features: monitor one or two priority channels while scanning non-priority channels
• Remote channel control with optional ACC cable
• Four watt front mounted speaker
• Wide frequency coverage
• Programable microphone hanger action
• Optional DTMF microphone (HM-152T)
• Optional voice scrambler unit (UT-109R or UT-110R)
• DTMF autodial function
• PC programmable
• Talk around function
• Power-on password function
• Nuisance delete function
• Time-out-timer, lock-out penalty timer

Specifications

• Output Power (at 13.6 VDC): 50W, 25W, 5W (Hi, L2, L1)
• Max. Frequency Deviation: ±5.0 kHz/±2.5 kHz (Wide/Narrow)
• Frequency Stability: ±2.5 ppm
• Spurious Emissions: 70 dB min.
• FM Hum and Noise: 46/40 dB typ. (Wide/Narrow)
• Audio Harmonic Distortion (AF 1 kHz 40% deviation): 3%, typical
• External Microphone Impedance: 600Ω (8-pin modular)
• Sensitivity (at 12 dB SINAD): 0.25 μV, typical
• Adjacent Channel Selectivity: 75/65 dB typical (Wide/Narrow)
• Spurious Response Rejection: 70 dB min.
• Intermodulation Rejection: 75 dB typ.
• Hum and Noise: 45/40 dB typ. (Wide/Narrow)
• Audio Output Power: 4W typical (at 5% distortion, 4Ω load)
• External speaker connector: 2-conductor 3.5 mm (1⁄8 in) / 4Ω
• Supplied Accessories: Hand Microphone (HM-152) Microphone Hanger DC power cable Key assign stickers Mounting bracket