IC-F6121D VHF & UHF Digital/Analog Mobile Transceiver

The IC-F6121D VHF and UHF digital/analog transceiver provides NXDN™ CAI-based IDAS digital mode operation and is compatible with IDAS single-site trunking. Users can customize the radio to suite there specific needs; the following information is programable: PTT ID, individual/talkgroup list, radio access number (RAN), status, short data message (SDM), call alert, radio check (RX), stun/kill/revive (RX), remote monitor (RX), emergency (No ACK), digital voice scrambler, and GPS data.

Features

• Supplied Accessories:
• Hand microphone (HM-152)
• microphone hanger
• DC power cable
• key assign stickers
• mounting bracket kit
• Features:
• 128 channel capacity and up to 8 zones allows users to group channels together
• 8–character alphanumeric LCD displays icons and shows a variety of information including operating status, caller’s name, and received messages
• Tough aluminum die-cast chassis and polycarbonate front panel are tested to the MIL standard 810F
• Five levels of mic gain provides clearer transmissions
• Large, backlit, front buttons are programmable to meet specific requirements
• An optional 25-pin, D-Sub ACC cable (OPC-2078) allows for an external GPS receiver or PC to be connected
• A powerful, 4-watt speaker delivers clear audio throughout the vehicles cabin
• IDAS™ digital operation provides NXDN™ CAI-based IDAS digital mode; compatible with IDAS multi-site conventional and IDAS single-site trunking
• Analog mode provides 2-tone and 5-tone signals giving uses selective calling, quite stand-by, and other convenient functions; and a stun/kill function disable the radio while a revive feature restores functionality
• Priority scanning allows users to monitor one or two priority channels while scanning non-priority channels; the transmit channel and talkback functions allow for quick responses while scanning
• MDC 1200 compatibility provides PTT ID, radio check (RX), emergency (No ACK), stun/revive (RX), and a table for 500 alias (analog only)
• Lone worker function alerts users to “”check in”” if the radio is not operated after a preset period; an emergency alert signal is sent out automatically if the user does not “”check in””
• CTCSS/DTCS encode/decoder (analog only)
• 8 DTMF autodial memories
• Microphone hanger action programmable
• Optional DTMF microphone (HM-152T)
• PC programmable
• Power-on password function
• Time out timer
• Talk around function
• Nuisance delete function (analog only)
• Forced narrow function (analog only)

Specifications

• Weight: 2.4 lb (1.1 kg)
• Dimensions: 5.91 x 1.57 x 6.59 in (150 x 40 x 167.5 mm)
• Frequency Coverage: 400 – 470 MHz, 450 – 512 MHz
• Number of Channels: 128 channels (8 zones)
• Type of Emission: F6121D: 11K0F3E, 4K00FIE/F1D
• Channel Spacing: F6121D: 6.25/15/30kHz, 6.25/12.5kHz
• PLL Channel Strip: 2.5 kHz, 3.125 kHz (VHF)
• Power Supply Requirement: 13.6 VDC
• Antenna Impedance: 50Ω (SO-239)
• Operating Temperature: -30°C to 60°C; -22°F to 140°F (radio only)
• Current Drain: Tx High 50W/45W: 11A Rx Max. audio: 1.2A Standby: 300 mA
• Output Power: F6121D: 45W, 25W, 4.5W (Hi, L2, L1), @ 13.6 VDC
• Frequency Deviation (maximum): ±5.0 kHz (wide) ±2.5 kHz (narrow)
• Frequency Stability: ±1.0 ppm
• Spurious Emissions: 72dB min., 70dB min.
• FM Hum and noise:46/40dB typical (Wide/Narrow)
• Audio harmonic distortion (AF 1kHz 40% deviation): 3% typical
• External Microphone Connector: 600Ω (8-pin modular)
• Sensitivity (at 12dB SINAD): 0.25μV typical, 0.18μV typical, (at 5% BER)
• Adjacent channel selectivity: F6121D: 75/65dB typical (W/N), 60dB typical (digital)
• Spurious response rejection: 70 dB minimum
• Intermodulation rejection: 75dB typical (W/N) 70 dB μV emf typical (digital)
• Hum and Noise: 45/40 dB typical (W/N)
• Audio output power (at 5% distortion): 4 watt typical
• External speaker connector: 2-conductor 3.5 mm (1⁄8 in)⁄8Ω