VHF/UHF Handheld Transceiver | 136–174 MHz, 16 channel, No LCD Display or Front Keypad

The F1000/F2000 Series is a sleek portable radio that fits nicely in your hand, designed to be the go-to for entry- to mid-level radio. Three model choices, basic—no display, simple—display with simple keypad, and full—display and full DTMF keypad, include an array of features such as a built-in motion sensor, channel announcement function, and a rugged, waterproof, and dustproof chassis. The radio series is ideal to meet the needs of a wide range of businesses, such as those involved in education, hospitality, and retail.

This IC-F1000 handheld transceiver has no LCD display or front keypad, 136–174 MHz frequency coverage, and 16 channels.

Features

• 136–174 MHz version
• 1500 mW large volume audio from Icom custom speaker
• Improved sound clarity
• Compact and lightweight
• IP67 waterproof and dust-tight protection
• Tested to 12 categories of MIL-STD-810-G environmental tests
• DTMF autodial memories
• 16-position rotary selector and ON/OFF volume knob
• “Shift key” function increases number of programmable key assignments
• Up to 14 hours of operating time with supplied BP-279 battery pack
• Eight character alphanumeric display (Ten-keypad/simplekeypad versions)
• Three color LED
• 16-code inversion voice scrambler
• Radio Stun/Revive/Kill commands (2-Tone and 5-Tone, RX only)
• Radio Stun/Revive commands (MDC, RX only)
• Auto TX function (2-Tone and 5-Tone)
• MDC emergency call with open microphone function (MDC, RX only)
• Man down function
• Lone worker function
• Motion and stationary detection function
• Surveillance function temporarily turns OFF the beep and LED indicator
• Power ON password (for the simple type and 10-key type)
• Emergency key for emergency call
• CTCSS and DTCS tone
• 2-Tone and 5-Tone
• MDC PTT ID, Emergency (TX/RX), Radio Check (RX), Stun (RX), Revive (RX)
• Up to 100 ID numbers and names can be saved to show the alias name, instead of the ID number
• BIIS PTT ID transmission
• Priority scan monitors one or two priority channels while scanning non-priority channels
• Mode dependent scan automatically changes the scan list according to the operating channel
• Power ON scan function
• Talk back timer
• Channel announcement function
• VOX function for hands-free operation
• Audio compander
• Siren sound for security alarm

Specifications

• Weight: 8.5 oz (240 g)
• Dimensions: 2.1 x 4.4 x 1.0 in (52.2 x 111.8 x 24.5 mm)
• Frequency Coverage: 136–174 MHz
• Number of Channels: 16 Channels
• Type of Emission: 16K0F3E, 11K0F3E
• Power Supply Requirement:7.5 VDC (Nominal)
• Current Drain: Tx: 1.3 A Rx: 500 mA/77 mA (Max. Audio (Internal SP)/Standby)
• Antenna Impedance: 50 Ω
• Operating Temperature: -22°F to 140°F (-30°C to 60°C)
• Output Power: 5 W, 2 W, 1 W
• Maximum Frequency Deviation: ± 5.0 kHz (@ 25 kHz), ± 4.0 kHz (@ 20 kHz), ± 2.5 kHz (@ 12.5 kHz)
• Spurious Emission: 70 dB (Min)
• Frequency Stability: ± 2.5 ppm
• Audio Harmonic Distortion: 1.0% (Typical) (@ 25/20 kHz), 1.5% (Typical) (@ 12.5 kHz) (at AF 1 kHz 40% deviation)
• FM Hum and Noise (Without CCITT Filter): 46 dB (Typical) (@ 25 kHz), 40 dB (Typical) (@ 12.5 kHz)
• External Microphone Connector: 3-conductor 2.5 (d) mm (1/10)/2.2 kΩ
• Sensitivity: At 12 dB SINAD: 0.25 μV (Typical) At 20 dB SINAD: –4 dBμV (Typical) emf
• Adjacent Channel Selectivity: TIA-603D: 76 dB (Typical) (@ 25 kHz), 53 dB (Typical) (@ 12.5 kHz) TIA-603A: 78 dB (Typical) (@ 25 kHz), 71 dB (Typical) (@ 12.5 kHz)
• Spurious Response Rejection: 70 dB (Min)
• Intermodulation Rejection: 74 dB (Typical)
• Hum and Noise (With CCITT Filter): 51 dB (Typical) (@ 25 kHz), 45 dB (Typical) (@ 12.5 kHz)
• AF Output Power (At 5% Distortion): Internal: SP 1500 mW (Typical) (With 8 Ω load) External: SP 400 mW (Typical) (With 8 Ω load)
• External Speaker Connector: 2-conductor 3.5 (d) mm (1/8)/8 Ω