Model H10-60N Aviation Headset | M-7A Noise-Cancelling Microphone
$619.50
The Model H10-60N aviation headset features a noise-canceling M-7A microphone for offering pilots with crisp & clear communications. Large, super-soft gel ear seal combined with a double-foam head pad offer comfort on long flights, while a flex/wire boom provides precise microphone place.
Features
- Expanded, super-soft, double-foam head pad offer comfort during long flights
- Larger and lighter undercut comfort gel ear seals
- Headset pressure & size adjustment
- M-7A advanced noise-cancellation microphone
- Dual volume controls adjust the listening level for each ear
- Boom guide lock
- Patented flex/wire boom provides precise microphone placement
- Dome jack allows for three different cord assemblies
- 23 dB noise reduction rating, certified
- Exceeds RTCA/DO-214 standards
- FAA TSO C57b, C58a
Specifications
Weight:
~22 oz (651 g), without cable
Ear Coupling:
around-the-around
Hardware Material:
steel
Connector Plugs:
PJ-055, 0.25 in (phone plug)
PJ-058, 0.206 in (mic plug)
Ear Dome Material:
ABS
Earphone Sensitivity:
90 dB SPL on flat plate coupler, re 1mW input @1KHz
Earphone Type:
dynamic
Earphone Impedance:
150Ω (300Ω each, wired in parallel)
Ear Frequency Response:
200 Hz —  5,500 Hz
Microphone Principle:
M-7A amplified electret
Microphone Impedance:
50Ω ±20%
Mic Sensitivity:
400mV ±6 dB into 150Ω load @ 1kHz for 114 dB SPL input
Microphone Frequency:
300 Hz — 3,500 Hz per RTCA DO 214
Microphone DC Supply Voltage:
8V — 16V (not polarity sensitive)
Source Resistance:
470Ω
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | David Clark Company |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally. Â
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more.  Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
D3 • Hover
The D3•Hover combines a CS3 as a wonderfully slim module for drones, along with the Pack Cap Rear to allow the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time, and of course, the Pocket Cap Front for all the small stuff.
NOTE: This price DOES NOT INCLUDE ANY FOAM. This bag is configured with no foam, so you'll have to add either the Drone Foam for the DJI Spark, or the Drone Foam for the DJI Mavic Air, since these are the two foam sets designed to fit inside the CS3.
Reviews
There are no reviews yet.