HDE51C Battery Hydraulic Tool Kit for Insulated & Uninsulated Terminals & Splices

DMC2386 contains the HDE51C battery hydraulic crimp tool and dies for insulated and non-insulated terminals and splices.

• 4 Die Sets for Insulated Terminals
• 6 Die Sets for Uninsulated Terminals

The HDE51C crimp tool is a hand held, self contained crimp tool intended to crimp terminals onto copper and aluminum cables with DMC’s HD51 die sets.

The HDE51C provides 6 tons of crimp force and extends the range of DMC’s Battery Powered Crimping Tools. It can support insulated terminals ranging from 8 to 2 AWG and uninsulated terminals ranging from 8 to 2/0 AWG.

SPECIFICATIONS:

• Length:  15.37 inches (391 mm)
• Width:  2.93 inches (75 mm)
• Depth:  4.56 inches (116 mm)
• Weight (with battery):  5.88 lbs (2.7kg)
• Sound Level:  75 db(A) at 1 meter
• Vibration:  <8.2 ft/s2  (2.5 m/s2)
• Hydraulic Oil:  Shell Tellus® T-15 (or equiv)

CRIMP CAPACITIES:

• Insulated terminals: 8 to 2 AWG
• Uninsulated terminals: 8 to 2/0 AWG.
• Max. Crimp Force: 6 Tons (58.83 kN)
• Avg. Crimp Time: 4 seconds
• Avg. Crimps per Charge: 100  (varies with size and type of items crimped)
• Avg. Crimps per Charge: 200 (with Extended Life Battery)

BATTERY (P/N: HDE-LI-B):

• 18 VDC, Lithium Ion, 1.5 AMP
• Charging Time:  15 minutes
• 2 batteries included with each new tool

OPTIONAL EXTENDED LIFE BATTERY (P/N: HDE-LI3-B):

• 18 VDC, Lithium Ion, 3.0 AMP
• Charging Time: 30 minutes

VAC POWER ADAPTORS:

• 120 VAC P/N:  HDE-120AC-A
• 240 VAC P/N:  HDE-230AC-A

BATTERY CHARGER:

• 120 VAC P/N:  HDE-LI-120C
• 240 VAC P/N:  HDE-LI-230C