Category – Avionics – Accessories
AV-HSI Experimental
Noise Eliminator Filter | 10 Amp, Wide Attenuation
This DC eliminator filter is FAA-PMA approved solution for reducing interference from alternators, strobe and rotating beacons, AC HVAC, DC motors, electronic fuel pumps and any other electrical components prone to produce noise. This device also protects on-board aircraft electronics from power surges and spikes.
AV-APA PMA
AV-APA PMA Is Now Available for Pre-order! Shipping Spring 2025.
The AV-APA PMA (analog port adapter) accessory enables aircraft owners with legacy autopilots to replace their old, heavy, vacuum-driven directional gyro with a more capable, lighter, digital AV-30 and potentially remove their vacuum system entirely.
The AV-APA PMA emulates the analog heading signal used by legacy autopilots to provide heading hold as well as the ability to follow GPS tracks from a portable or IFR GPS.
M655 Five Function Indicator
M655 FEATURES 2 1/4″ STANDARD MOUNT OR FRONT MOUNT OUTSIDE AIR TEMPERATURE (°F) OUTSIDE AIR TEMPERATURE (°C) PRESSURE ALTITUDE DENSITY
Select options
This product has multiple variants. The options may be chosen on the product page
Twin CGR-30P Combo Package
Select options
This product has multiple variants. The options may be chosen on the product page
CGR-30 Combo Package
CGR-30 Combo Package (Single Engine) FAA Approved Primary Replacement FAA TSO’d, STC’d, TCCA Validated, EASA Validated Remove your old primary engine
Select options
This product has multiple variants. The options may be chosen on the product page
CGR-30P Premium Package
CGR-30P Premium Package (Single Display) Worksheet here: https://iflyei.com/downloads-electronics-international-instruments/ FAA Approved Primary Replacement Primary Replacement STC’d, TSO’d & PMA’d Remove your
Select options
This product has multiple variants. The options may be chosen on the product page
G4 Engine Monitor
G4 Engine Monitor Here’s why you should install G4: Leaning: G Series is the best technology available, there’s nothing else like it,
Select options
This product has multiple variants. The options may be chosen on the product page
CGR-30P Single Display Experimental
CGR-30P Premium Engine Monitor [EXPERIMENTAL] Choose the full packages 4 or 6 cylinder to have all the probes and transducers
Select options
This product has multiple variants. The options may be chosen on the product page
ETX900-TSO-35-PA-KIT
STC installation kit to be used with the ETX900-TSO. Use for replacing a Concorde or Gill 35 Ah battery.
We are adding kits for many other make/models. Please check back regularly.
Select options
This product has multiple variants. The options may be chosen on the product page
ETX-JMP12/24 12V-24V Jump Pack (All-In-One)
This is a 12V/24V jump pack that can boost just about anything! Very compact and the entire kit is only 4 pounds. This jump pack uses the technology of lithium iron phosphate (LiFePo4) chemistry, not Lithium Cobalt (LiCoO2). LiFePo4 is the most powerful, safest and most robust of all the lithium chemistries, plus double the life span of lithium cobalt packs.
Examples of what it can jump start: automobiles, diesel trucks, motorcycles, boats, construction equipment, experimental and certified aircraft, tractors, snowmobiles, ATV/UTVs, riding lawnmowers, and so much more.
BB-TH-U Thermal Battery Box “U” Case
Thermal battery box to protect from radiated or convection heat. This battery box is designed to be compatible with our existing “U” case battery models; ETX1600, ETX900-24, ETX680-24-VNT.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. Weight is .68Kg or 1 Lb. 8oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F (60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
BB-MU2 Light Weight Aluminum Battery Box
The light weight aluminum battery box is excellent to use with the EarthX lithium “E” case batteries for easy installation. Has a bolt-down tab for easy removal of the battery from the front or top, and is acrobat rated (even with PC680).
This battery box can be used with: ETX680, ETX900, ETX900-VNT, ETX1200, and Odyssey’s PC680
If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit.
This battery box was engineered to be strong enough to withstand 30 G of force for the EarthX Lithium Batteries or 6G of upward force and 9G of downward force with the PC680. It only weighs .23Kg or 8oz. This unique design allows for simple, easy installation with the dimensions: 7.1″ L x 3.1″ W x 6.5-6.6″ (adjustable height) or (180mm x 80mm 166-168mm).
What’s included:
- 1 x battery box
- 1 x top front removeable hold down tab
- 2 x screws for hold down
