Category – Instruments – All
A200-HMB – Bendix Rotational Speed Sensor
The A200-HMB is an Hall Effect rotational speed sensor. It provides a speed accuracy of 1 RPM when used in conjunction with the TM200 instrument.
The output signal is a latched, pulse width modulated square wave output of 0V to a maximum of 30V, proportional to rotational speed.
Power requirements are 3.8V to 30V / 3mA.
Precision machined from 6061 T6 aircraft grade aluminum, this sensor is designed to thread into the vent hole of Bendix unpressurized magnetos.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this speed sensor is STC'd as a primary replacement.
smartPanel Mount for Apple iPad 10th Generation
A new flush mounting system to dock and fully integrate your Apple iPad 10th Generation into your aircraft instrument panel.
Select options
This product has multiple variants. The options may be chosen on the product page
smartPanel Mount for Apple iPad 10th Generation (USB-C to open wire)
A new flush mounting system to dock and fully integrate your Apple iPad 10th Generation into your aircraft instrument panel.
Select options
This product has multiple variants. The options may be chosen on the product page
A200-HMS – Slick/Unison Rotational Speed Sensor
The A200-HMS is an Hall Effect rotational speed sensor. It provides a speed accuracy of 1 RPM when used in conjunction with the TM200 instrument.
The output signal is a latched, pulse width modulated square wave output of 0V to a maximum of 30V, proportional to rotational speed.
Power requirements are 3.8V to 30V / 3mA.
Precision machined from 6061 T6 aircraft grade aluminum, this sensor is designed to thread into the vent hole of Slick/Unison unpressurized magnetos.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this speed sensor is STC'd as a primary replacement.
Model 450A Digital Voltmeter | Amber LED Display, Remote Sensing
Model 450A Digital Voltmeter | Green LED Display, Remote Sensing
Model 450A Digital Voltmeter | White LED Display, Remote Sensing
M800R Remote Digital Clock Chronometer | 28V, Orange Lighting | Remote Unit
A200-TSA Outside Air Temperature Sensor
The A200-TSA is a monolithic temperature sensor with on-chip signal conditioning and an operating temperature of -50°C to 150°C. It has an accuracy of +/- 0.5°C over the full operating range.
The output voltage is proportional to the temperature x the supply voltage (ratiometric). The output swings from 0.25 V at −50°C to +4.75 V at +150°C using a single +5.0 V supply.
The temperature transfer function is:
VOUT = (V+/5 V) × [1.375 V +(22.5 mV/°C) × TA]
Power requirements are 5V / 1mA.
The sensor has a 5/16-24 threaded body and is supplied with two nylon mounting washers and a Nyloc fastening nut.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this temperature sensor is STC'd as a primary replacement.
M800R Remote Digital Clock Chronometer | 14V, Orange Lighting | Remote Unit
Model 450 Digital Voltmeter | Green LED Display
Model 450 Digital Voltmeter | White LED Display
