ANTENNA/Blade type, broadband, for use with transponder or DME application, 760-1220 MHz, 50 Ohms, vertical polarization, BNC Female Connector, 2 Hole Mount & a White Finish
CI 105 DME TRANSPONDER ANTENNA/BNC Female Connector, L-Band, 960-1220 MHz and 1030-1090 MHz, 50 Ohms, Airspeed 400 Knots, cork gasket included, 2 Hole Mount & a White Finish
The CI 105 is a broadband and rugged antenna designed for DME or transponder use. The antenna assembly is encased in a glass reinforced polyester molded shell and has a standard two stud mounting configuration. It includes a BNC connector and covers 960 MHz to 1220 MHz frequencies and is rated to 400 Knots TAS at 25,000 feet.
RAMI AV-532 VOR/LOC/GS Receive Only Antenna
The AV-532 is a VOR/LOC/GS receive only antenna. It consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph.
CI 507 VOR GS DIPLEXER
AV-74-1 ANTENNA/Blade type, broadband, for use with transponder or DME application, 960-1220 MHz, 50 Ohms, vertical polarization, BNC Female Connector, 2 Hole Mount & a Gloss White Finish
RAMI AV-15 Airborne Communications | UHF
The AV-15 is used with aviation, land mobile radio, and flight phone bands. The durably constructed chrome-plated phosphor bronze whip is set in a teflon insulator and the chrome-plated ball tip provides low noise static discharge. The antenna is designed to operate at speeds up to 350 mph and altitudes of 50,000 ft. It has a drag force of 0.75 lb @ 250 mph.
RAMI AV-200(-B) Airborne ELT
RAMI AV-210 Airborne CAP | VHF
RAMI AV-530 Airborne Communications | VHF
The AV-530 is designed for broadband communications. The antenna has a die-cast aluminum base and a tapered stainless steel whip for less drag at higher airspeeds. It is supplied with a weather-sealing gasket and mounting hardware. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 1.65 lb @ 250 mph. This antenna is a direct replacement for the CI 292-1.
RAMI AV-586 Antenna Accessories | Coupler
The AV-586 antenna coupler is a signal splitter providing two outputs from a single antenna. The necessity of bringing this product forward comes from advancing technology in avionics. Newer designed navigational radios have only one antenna input to receive all three (VOR/LOC/GS) signals whereas older legacy radios had a separate antenna input for the VOR/LOC signal and another antenna input for the GS signal.
In an aircraft instrument panel with two newer navigational radios the AV-586 is the article that will provide the necessary signals to both radios utilizing a single antenna.
