Cyclone 21 Avionics Cooling Fan | 3-Port, 28VDC, 2-wire
M301 Digital Temperature Gauge
M301 Features FAHRENHEIT OR CELSIUS MINIMUM PANEL SPACE LIGHT WEIGHT AUTOMATIC DIMMING MINIATURE REMOTE PROBE SUNLIGHT READABLE DISPLAY LASER ENGRAVED
Select options
This product has multiple variants. The options may be chosen on the product page
VI-2µFA SureFly Ignition Interface
VI-2µFA SureFly Interface Works with SureFly SIM4P Connect to the RPM input channel using E.I.’s VI-2µFA Use with EDC-33 (MVP
Select options
This product has multiple variants. The options may be chosen on the product page
Manifold Pressure Sensor
M303 – Digital Temperature Gauge
M303 FEATURES LIGHT WEIGHT 2 1/4 STANDARD MOUNT OR FRONT MOUNT AUTOMATIC DIMMING MINIATURE REMOTE PROBE SUNLIGHT READABLE DISPLAYS OUTSIDE
Select options
This product has multiple variants. The options may be chosen on the product page
FT-90 Fuel Flow Transducer
FT-60 Fuel Flow Transducer
TY96/TY97 Mounting Tray, Installation Kit and Manuals
3TC14 Series Circuit Breaker | 30 Amp Rating
A200-PSF Fuel Pressure Sensor
The A200-PSF is a bulk micro-machined, gage type pressure sensor for use in both harsh and benign media with superior accuracy over an operating temperature of -40°C to 105°C. It has superb accuracy of +/- 0.5% full scale.
It contains a custom ASIC which provides signal conditioning for calibration and temperature compensation at the point of measurement. Each sensor is traceable to NIST calibration standards.
Power requirements are 5V / 10mA. Signal output is linear and varies from 0.5V (0 PSI) to 4.5V (100 PSI). Overpressure burst rating is 300 PSI.
The sensor has a 1/8" NPT threaded port for connection to the fuel pressure line.
Supplied with a 36" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this pressure sensor is STC'd as a primary replacement.
A200-HMB – Bendix Rotational Speed Sensor
The A200-HMB is an Hall Effect rotational speed sensor. It provides a speed accuracy of 1 RPM when used in conjunction with the TM200 instrument.
The output signal is a latched, pulse width modulated square wave output of 0V to a maximum of 30V, proportional to rotational speed.
Power requirements are 3.8V to 30V / 3mA.
Precision machined from 6061 T6 aircraft grade aluminum, this sensor is designed to thread into the vent hole of Bendix unpressurized magnetos.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this speed sensor is STC'd as a primary replacement.
