CHT Probe 4 Pack
Includes 4 5050T CHT Bayonet Probes
The Cylinder Head Temperature (CHT) – standard Bayonet – probe, has a captive 3/8-24 boss which is screwed into the base of the cylinder. The CHT port is predrilled by your engine manufacturer. The CHT probe has a screwdriver slot to facilitate tightening.
- 4 Thermocouple Type K CHT Bayonet Probes
RPM Sensor for Slick Mag
Please review the 3 choices below for the correct sensor. When ordering use the drop down option box, if necessary.
- Slick Non press PN- 420815-1 $299
- Slick 600 (press or non press) PN-420806 $395
- Slick 6000 420809 $395
Select options
This product has multiple variants. The options may be chosen on the product page
RPM Sensor for Bendix Mag.
Please review the 3 choices below for the correct sensor. When ordering use the drop-down option box (top right), if necessary.
- Bendix Non-Press PN-420815-2 $299
- Bendix Dual PN-420808 $395
- Bendix 1200 Pressurized PN- 420807 $395
Select options
This product has multiple variants. The options may be chosen on the product page
PT-3000S – Hydraulic Pressure Transducer
PT-100GA – T Torque Pressure Transducer
A200-PSO Oil Pressure Sensor
The A200-PSO is a bulk micro-machined, gage type pressure sensor for use in both harsh and benign media with superior accuracy over an operating temperature of -40°C to 105°C. It has superb accuracy of +/- 0.5% full scale.
It contains a custom ASIC which provides signal conditioning for calibration and temperature compensation at the point of measurement. Each sensor is traceable to NIST calibration standards.
Power requirements are 5V / 10mA. Signal output is linear and varies from 0.5V (0 PSI) to 4.5V (200 PSI). Overpressure burst rating is 600 PSI.
The sensor has a 1/8" NPT threaded port for connection to the oil pressure line.
Supplied with a 36" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this pressure sensor is STC'd as a primary replacement.
A200-PMP Manifold Pressure Sensor
The A200-PMP is a bulk micro-machined, absolute type pressure sensor for use in both harsh and benign media with superior accuracy over an operating temperature of -40°C to 105°C. It has superb accuracy of +/- 0.5% full scale.
It contains a custom ASIC which provides signal conditioning for calibration and temperature compensation at the point of measurement. Each sensor is traceable to NIST calibration standards.
Power requirements are 5V / 10mA. Signal output is linear and varies from 0.5V (0 PSI) to 4.5V (50 PSI). Overpressure burst rating is 300 PSI.
The sensor has a 1/8" NPT threaded port for connection to the manifold pressure line.
Supplied with a 36" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this pressure sensor is STC'd as a primary replacement.
Vibration Sensor
CONVERTER CABLE/4 PIN PROBE
TRIG TA70 – Certified GPS Antenna
B-11-2 Air Temperature Probe
