SAC 7-35 Air Data Computer | ADS-B for Garmin 400W/500W
SAC 7-35 Air Data Computer
The SAC7-35 Airdata Computer for General Aviation is actually four systems in one; it provides an altitude encoder, altitude alerting, fuel flow, and air data computer. SAC 7-35 is an FAA TSO approved altitude encoder that provides RS-232 for newer generation transponders as well as standard Gilham Grey code for legacy transponders. The system is also equipped with SANDIA’s altitude inflight monitoring (AIM) that alerts pilots whenever the aircraft deviates 100 feet or more from selected altitude. When paired with a fuel flow transducer, the SAC 7-35 provides all the fuel flow data required for navigation systems to monitor fuel flow. The SAC 7-35 is also a fully TSO’s airdata computer with multiple interface formats that provide data to a wide variety of avionics systems.
SR 623 Switching Relay | Six Two-Pole Relays
CONVERTER/ST26 Tach Generator Adapter. Converts analog to digital. Includes install kit
AIS 240B-35 Switching Module | 28VDC, For MARC 35 + False
The AIS240A-35 is a multi-purpose switching unit, consisting of six, four pole relays for a total of 24 poles of switching capabilities. The relays are arranged in a group of four (16 poles) and two single relays (4 poles each). The relays can be activated by either a ground or 28 Vdc, maximizing installation flexibility. The AIS240A-35 uses gold plated dry contacts that are sealed in nitrogen filled cases.The rugged construction makes them ideal switching units for both fixed wing and helicopter operations.
SRU 10 Ten Module Enclosure | For MARC70 Interface Modules
SR64-1 Switching Relay Module | MARC 70, 24 Pole
The SR 64 provides 24 poles of switching through six, hermetically sealed, bifurcated relays. The relays contacts are gold plated and have a 2 amp resistive load rating at 28 VDC. Coil current is 120 mA. K1, K2, K3 and K4 are switched simultaneously through coil pins, 71 and 72. K5 and K6 are independently switched through their coil pins.
SR 54 Switching Module | 20 Pole
The SR 54 switching relay provides 20 poles of switching through five hermetically sealed, bifurcated relays. The SR 54 has a built-in circuit that switches all relays to their de-energized condition whenever K6 is activated. This can be used for such applications as insuring LOC is presented on the HSI whenever a LOC signal is selected.
AIS 200B-35 20 Pole Switching Module
The AIS 200B-35 is a 20-pole, signal level, switching unit designed for use with NAV systems that share the aircrafts HSI/CDIs OBS functions. The contact switching rating is limited by the circuit board track current capacity to 1.0 amp. This unit has a revisionary relay which selects the LOC signal for display on the HSI/CDI whenever a LOC channel is selected in the NAV unit. This unit uses 10 relays in a series/parallel arrangement to provide the same 20 poles of switching. While model AIS 200B-35 is a direct fit and replacement for the AIS 200-35 and AIS 200A-35 models, installation of this AIS 200B-35 remains the same. Operates on 28 VDC.
SAFE 328 Avionic Cooling Fan | 3 Ports, 28 Volts
The SAFE 328 Avionics Cooling Fan simultaneously cools up to three avionics units. The SAFE 328 is capable of suppling up to 20 CFM of air flow — helping to keep avionics at their proper operating temperature. Fault protection is also provided; when the RPM's drop below a pre-defined threshold, the SAFE 328 sends and alert indicating a fault has occurred. High quality, brushless motors are used providing RunQuiet technology for quiet operation. This FAA PMA unit surpasses the stringent environmental testing ensuring years of reliables service.
