Bolted
Flex Bolted Slide [Boeing]
Flex Bolted Slide [Boeing] has a fixed base for attaching your iPad/EFB to a solid, flat surface using the industry standard AMPs hole pattern. The slide function of this mount allows the pilot to position the iPad/EFB AFT with easy access to the egress window. Once in the air the pilot can slide the iPad/EFB FWD to optimal viewing angle.
Device Holders Sold Separately
Select options
This product has multiple variants. The options may be chosen on the product page
Flex Bolted Quick Release
The Flex Bolted Quick Release has been designed to secure anywhere with four screws of an AMPs pattern. Once the base is secured in the desired location you can slide in the mount and lock it in place. Device can also be secured with 3M Adhesive Petal Base, sold separately.
Device Holders Sold Separately
Select options
This product has multiple variants. The options may be chosen on the product page
Beech Yoke Faceplate Compact Quick Release
Built with aviation grade aluminum, this product will replace your current Control Arm Plate/Clock. Your device will be securely centered on your control arm offering the best visibility and easy to access. Install the plate and you are ready to connect your device by cradle or case. The quick release feature provides for easy slide in, slide out connection to the cradle/case. The lock down thumb screw secures the shoe to the sled for added safety and security. This mount affixes to the existing hole pattern on most Beech aircraft.
Device Holders Sold Separately
Chart Holder [Gulfstream]
Vans RV-8 Flex Bolted Quick Release
Finally, a solution for mounting your iPad in the Vans RV-8 cockpit!
These concentric rings suit the Vans RV-8, mounted through the 2" lightening hole in the 4130 steel windshield bow gusset to attach a MyGoFlight quick release base on the port or starboard (or both) sides of the cockpit. Together they form a strong, vibration free and convenient installation. A handy alternative to an iPad knee-mount that typically interferes with the controls. Each kit comes complete with four M4 x 16mm stainless screws.
Select options
This product has multiple variants. The options may be chosen on the product page
Compact Bolted Adhesive
The Compact Bolted Adhesive - mounts your iPad or Tablet on the chart holder or other smooth flat surface. The iPad/Tablet can tilt up to 15° and can be angled up or down. The Sport Mount - Universal is secured to the surface of the yoke with high strength 3M RP16, adhesive used in the aircraft industry to attach parts without screws or bolts. This ensures secure mounting that is installed without tools and can be removed if necessary.
Device Holders Sold Separately
iPad / Tablet Leg Mount
Compact Bolted Slide [Boeing]
The Compact Bolted Slide [Boeing] is a fixed base for attaching your iPad/EFB to a solid flat surface utilizing the industry standard AMPs hole pattern. The mount provides maximum stability and reliability. The slide function allows you to slide the iPad/EFB AFT to an optimal viewing angle. Mount swivels 360° and tilts 90° providing infinite adjustment.
Device Holders Sold Separately
Flex Bolted Panel
Flex Bolted Panel is ann infinitely articulating and adjustable arm that can hold any iPad or device. Lightweight and easy to configure, the Panel base has the same hole pattern as existing instrument gear, so installation requires no power tools. Perfect for renters and owners alike.
Device Holders Sold Separately
Compact Bolted Panel
Flex Bolted Half Collar [Beech Center Yoke]
Flex Bolted Half Collar [Beech Center Yoke]- an infinitely articulating and adjustable arm with the ability to hold any iPad or device. The Bolted Yoke Half Collar Beech mount attaches directly to the retaining clamp on the center yolk arm. Simply remove the screws that hold the retaining clamp in place, install our mount on top of the retaining clamp and secure it with the original screws.
Compact Magnet
Built with chrome alloy, aluminum, a powerful neodymium magnet, and a 25 lb pull rating, it is compatible with all MyGoFlight cradles and cases. Made for those who don't wish to drill holes in the panel but want the flexibility of moving the mount quickly around the cockpit. The base of the magnet is covered with a protective rubber shield to protect your aircraft's paint and other surfaces. Excellent for aircraft interiors, gas trucks, hangars, and other steel surfaces. NOT to be used on the aircraft exterior or with open cockpit canopy aircraft.
This mount comes with a Sport™ Adapter mounting system and an adjustable tilt plate, which adds flexibility in how the iPad/Tablet is positioned. The adapter can tilt up to 15°. The iPad/Tablet can rotate between landscape and portrait mode while attached to the mount. The footprint base measures 1.56" x 1.875".
Device Holders Sold Separately
