ETX-QCC4 EarthX 48″ Quick Connect Cable
$36.00
SPECIFICATIONS
- Max jump start amps: 400 amps
- Length: Battery “pigtail” cable = 48”/122 cm
- Jump pack adapter cable: 12”/30 cm
- 1/4″ / M6 ringlets
- Industry standard 2-pole SAE connector, with rubber sealing cap.
- Cable max. rating: 400 Amp
When not in use, keep rubber sealing cap closed on the SAE connector end.
You can then use this pigtail to charge your battery or for jump starting.
If the cables get hot, disconnect and allow them to cool down before use.
Caution: Never use the supplied battery chargers pigtail cables that comes with your charger for jump starting as they are not designed to carry this amount of amperage. Only use the EarthX quick connect (model# ETX-QCC4) cables to jump the battery.
48″ Long Quick Connect Charging/Jump Start Cables. You can permanently install this quick connect cable to your battery (lead acid or lithium) that can be used for quick, easy access for charging or be used with a portable jump starter (not included) to jump start your battery in seconds! No removal of seats, no removal of battery covers, no tools needed, no time wasted! Engineered and designed to carry 400 amps of energy without melting the wire by using 150 strand insulated copper wire. The standard EC5 SAE fitting will fit many standard portable jump pack on the market today, but if you are not using the EarthX jump pack, make sure to check the polarity of your jump pack connection (positive to positive, negative to negative).
SPECIFICATIONS
- Max jump start amps: 400 amps
- Length: Battery “pigtail” cable = 48”/122 cm
- Jump pack adapter cable: 12”/30 cm
- 1/4″ / M6 ringlets
- Industry standard 2-pole SAE connector, with rubber sealing cap.
- Cable max. rating: 400 Amp
When not in use, keep rubber sealing cap closed on the SAE connector end.
You can then use this pigtail to charge your battery or for jump starting.
If the cables get hot, disconnect and allow them to cool down before use.
Caution: Never use the supplied battery chargers pigtail cables that comes with your charger for jump starting as they are not designed to carry this amount of amperage. Only use the EarthX quick connect (model# ETX-QCC4) cables to jump the battery.
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | EarthX Batteries |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
BB-TH Thermal Battery Box “E” Case
Thermal battery box to protect from radiated or convection heat. Fits the “E” case batteries including ETX680/ETX900/ETX900-VNT/ETX1200. Designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. The hold-down tab comes with a mounting fixture that can hold a cooling air duct up to 1” in diameter. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .49Kg or 1 Lb. 1.2oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140°F ( 60ºC) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113ºF or 45ºC.
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
BB-MU Light Weight Battery Box Fit “E” Case And PC680
The light weight aluminum battery box is excellent to use with the EarthX lithium batteries for easy installation. This battery box can be used interchangeably for the EarthX Lithium Battery models ETX680/900/900-VNT/1200 or the Odyssey PC680 with the use of a foam spacers. We call it the multi-use battery box for this reason.
If you are using the battery box for the EarthX Lithium batteries, you will use a foam spacer on the left and right side of the battery for a snug fit. If you are using the battery box for the PC680, you will use the foam spacer on the backside at the bottom of the case to adjust for the tapering of the case for a snug fit.
This battery box was engineered to be strong enough to withstand 30 G of force for the EarthX Lithium Batteries or 15 G of force for the PC680 yet only weighs .275Kg or 10oz. This unique design allows for simple, easy installation with the dimensions: 7.1″ L x 3.1″ W x 6.5-6.6″ (adjustable)H or (180mm x 80mm 166-168mm).
What’s included:
- 1 x battery box
- 1 x top front hold down
- 2 x screws for hold down
Adapter-CDE (Terminal Adapters Designed For C, D, And E Cases)
This terminal adapter kit comes with 2 brackets and 2 screws for the positive and negative posts with the standard size of 6mm and makes for an easy installation when your motor sports vehicle requires a side or front mounted battery cable versus top mounting. Fits all C, D, and E cases.
Comes included with the following batteries: ETX24C, ETX36C, and ETX36D, ETZ14C.
Adapter-ABF (Terminal Adapter Designed For A, B, And F Cases)
This terminal adapter kit comes with 2 brackets and 2 screws for the positive and negative posts with the standard size of 6mm and makes for an easy installation when your motor sports vehicle requires a side or front mounted battery cable versus top mounting. Fits all A, B, and F cases.
Comes included with the following batteries: ETX18B and ETX18F.
Reviews
There are no reviews yet.