FireFly Pro Waterbug Emergency Distress Strobe
$130.95
The Firefly Pro Waterbug emergency distress strobe is SOLAS approved and has a built-in water activation sensor that automatically activates when submerged. The Waterbug is capable of producing 41 candela of light per strobe for up to 56 hours on AA lithium batteries. With its wide light emission LEDs, the LEDs cuts through foul conditions by creating a super-bright flash which be seen for over 3.5 miles. Four activation functions allow users to toggle between armed mode for automatic water activation, ultra-bright strobe or S.O.S. strobe to alert search and rescue, then toggle the steady-on feature for close-up recover operations.
Features
- Water activation feature automatically activates when submerged
- Innovative wide light emission LEDs produces a 360 degree beam with 41 candela of light which is visible for over 3.5 miles
- Cool white light, without any yellow tenting, transmits more light that is visible at greater distances
- Energy efficient microprocessor and redesigned electronics maximize the operational life even in harsh conditions
- Provides 56 hours of continuous strobe operation and 28 hours using the steady-on feature when using a single set of AA lithium batteries; exceeds USCG and SOLAS requirements
- comfortably fits inside an inflatable life jacket or pocket
- Rugged, military-grade enclosure is able to withstand years of abuse in harsh environments
- Easily mount the the Firefly Pro to a life jacket, belt, or pack via the two lashing loops and included velcro strap
Specifications
Weight:
2.39 oz (68 g), without batteries
Dimensions:
4.4 x 2.2 x 1.2 in (11.7 x 5.7 x 2.8 cm)
Operation:
Manual on/off switch, and water activation
Waterproof:
Factory tested to 33 ft. (10 m)
Lamp:
Cool white LED
Strobe Intensity:
41 candela (strobe)
Strobe Visibility:
Over 3 miles
Strobe Flash Rate:
60 P/M±
Strobe Operation:
56 hr
Certification:
SOLAS, USCG, MED, TSO-C85b, IMO LSA, CE
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | Artex |
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally. Â
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more.  Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
D3 • Hover
The D3•Hover combines a CS3 as a wonderfully slim module for drones, along with the Pack Cap Rear to allow the bag to be configured as a backpack for those times when you need to fly and be on the move at the same time, and of course, the Pocket Cap Front for all the small stuff.
NOTE: This price DOES NOT INCLUDE ANY FOAM. This bag is configured with no foam, so you'll have to add either the Drone Foam for the DJI Spark, or the Drone Foam for the DJI Mavic Air, since these are the two foam sets designed to fit inside the CS3.
Pocket Cap Rear
The FLEX POCKET CAP REAR is exactly the same as the POCKET CAP FRONT, except it's the "opposite": This module goes onto the Rear surface of any other FLEX module (not the Front).
Now you can have lots of small pockets on the REAR of your bag, to go along with all the small pockets you already have on the Front.
Flat Cap Rear
The FLAT CAP REAR zips onto the Rear surface of all FLEX Center Sections and also directly onto a Front End Cap (PCF, FCF).
This module offers two thin pockets on the outer surface and also a thin half-height flap pocket on the inner surface. The convertible panel on the back gives you the ability to slide your BrightLine Bag onto the telescoping handles of a rolling suitcase or folding cart.
