M850B Digital Clock
M850B FEATURES FAA APPROVED 2 ¼” INTERNAL MOUNT OR FRONT MOUNT TWO BUTTON CONTROL SYSTEM GREENWICH MEAN TIME LOCAL TIME
E-1 Single EGT Instrument
A200-HAS Hall Effect Current Shunt
The A200-HAS is an economical and precise solution for DC current measurement in electrical systems up to +/- 100A in capacity.
The output of the device has a positive slope (Vcc / 2) when an increasing current flows through the primary copper conduction path. The internal resistance of this conductive path is 130 µΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads and provide a minimum isolation of 3,000V.
Current sense response time is 3uS.
Power requirements are 3V @ 10mA. Signal output is linear and varies from 0.0V (-100A) to 3.0V (+100). Zero current is represented by 1.5V.
The sensor has two 1/4" terminal posts for connection to the power bus.
Supplied with a 48" color coded cable.
When installed in accordance with the approved instructions and as part of a qualified instrument system, this current sense shunt is STC'd as a primary replacement.
Electrostatic Discharge Heat Gun | 120V, 1600W, 2 Stage Airflow, Variable Temperature
The HG 2320 ESD is suitable for use in electrostatic protected areas (EPA). ESD (electrostatic discharge) is the transfer of an electric charge that takes place when two objects that have been charged to different electric potentials, or have different electric potentials due to static induction, are brought into contact with each other. This discharge can cause product defects as well as equipment failures, but the HG 2320 ESD has a conductive housing that will not build up or hold a static charge when used in EPA.
M811C Digital Clock
M811C FEATURES FAA APPROVED 2 ¼” INTERNAL MOUNT or FRONT MOUNT SIX-DIGIT DISPLAY ON ALL 3 FUNCTIONS LOCAL TIME FLIGHT
5TC7 Series Circuit Breaker | 50 Amp Rating
6000 Series LED Industrial String Light | 24in, 3 Light Bar, End-To-End Pluggable
RATCHET HAND CRIMP TOOL/For use with Micro-fit crimp terminals 20-30 gauge
RAMI AV-401 Airborne ELT Antenna
