RAMI AV-586 Antenna Accessories | Coupler
The AV-586 antenna coupler is a signal splitter providing two outputs from a single antenna. The necessity of bringing this product forward comes from advancing technology in avionics. Newer designed navigational radios have only one antenna input to receive all three (VOR/LOC/GS) signals whereas older legacy radios had a separate antenna input for the VOR/LOC signal and another antenna input for the GS signal.
In an aircraft instrument panel with two newer navigational radios the AV-586 is the article that will provide the necessary signals to both radios utilizing a single antenna.
RAMI AV-571 Antenna Accessories | Diplexer, Splitter
USB-6A Smart Charger
XploringAlaska ACME Tail Wheel Pole Mount
The Rock Steady pole mounts give you the extra distance to get your 360 camera out for those famous shots.
Select options
This product has multiple variants. The options may be chosen on the product page
Optimate TM-275 v2 10 amp Battery Charger/Maintainer/Power Supply (12-13.2V Batteries)
This Optimate Lithium charger will quickly charge your battery at 10 amps, maintain it at the optimal voltage, and can be used as a power source of 8 continuous amps! For example, you can use it as power supply while programming your aircraft EFIS so you are not draining your battery while you work.
Vans RV-8 Flex Bolted Quick Release
Finally, a solution for mounting your iPad in the Vans RV-8 cockpit!
These concentric rings suit the Vans RV-8, mounted through the 2" lightening hole in the 4130 steel windshield bow gusset to attach a MyGoFlight quick release base on the port or starboard (or both) sides of the cockpit. Together they form a strong, vibration free and convenient installation. A handy alternative to an iPad knee-mount that typically interferes with the controls. Each kit comes complete with four M4 x 16mm stainless screws.
Select options
This product has multiple variants. The options may be chosen on the product page
Flex Clamp Collar [Robinson Console Bar]
Flex Clamp Collar [Robinson Console Bar] works with the console bar on the pilot side of Robinson R22, R44, and R66 helicopters. The mount secures onto the console bar using the collar and two screws (included). The infinitely articulating and adjustable arm attaches to our Universal Cradle or the iPad Sport Case. Once attached, your device can be viewed in either portrait or landscape mode simply by rotating the device, without having to make any additional adjustments.
Device Holders Sold Separately
Select options
This product has multiple variants. The options may be chosen on the product page
Flex Clamp Square Bar [Airbus]
Flex Clamp Square Bar [Airbus] works with the square bar that goes from the panel across to the window of Airbus/Eurocopter helicopters. The mount is sandwiched onto the square bar and is then secured using the two plates and four screws. The infinitely articulating and adjustable arm attaches to our Universal Cradle or the iPad Sport Case. Once attached, your device can be viewed in either portrait or landscape mode simply by rotating the device, without having to make any additional adjustments.
Device Holders Sold Separately
Flex Clamp Rod [Rosen Sun Visor Rail]
Flex Spar/Strut [Robinson]
This clamping mount works on many spars, struts, and tubes common in Mooney, Husky and other aircraft. Also works well as a Robinson Helicopter Mount, securing to the center spar on the windshield of Robinson R22, R44, and R66 helicopters. The infinitely articulating and adjustable arm attaches to our Universal Cradle or the iPad Sport Case. Once attached, your device can be viewed in either portrait or landscape mode simply by rotating the device, without having to make any additional adjustments.
Device Holders Sold Separately
Flex Suction PRO
Flex Suction PRO - an infinitely articulating and adjustable arm with the ability to hold any iPad or device. The Mount utilizes one vacuum suction cup with a built-in finger pump that informs you if the mount is losing suction. Give it a couple pumps and it is quickly back to full strength.
Please Note: Due to the vacuum pressure we recommend removing this mount when finished with flight. The vacuum pressure can warp acrylic windows or other smooth surfaces if left too long.
Device Holders Sold Separately
