CI 102 MARKER BEACON ANTENNA /BNC Connector, 75 Mhz, 50 Ohms, 4 hole internal mount, Airspeed 400 Knots. Includes gasket C10208, & a White Finish
The CI 102 marker beacon antenna is designed for use with modern, high sensitivity marker beacon receivers. Small and lightweight, this marker beacon features 4-hole internal mounting for simple installation. The antenna assembly is enclosed in an injection molded radome which is impervious to the tough environments typical of the underside of an aircraft. DC grounded to minimize accumulation of precipitation static.
CI 118 MARKER BEACON ANTENNA/BNC Connector, 75 MHz, 50 Ohms, Airspeed 400 Knots
CI 118-1 MARKER BEACON ANTENNA/BNC Connector, 75 MHz, 50 Ohms, Airspeed 400 Knots
The CI 118-1 marker beacon is a low-drag alternative to the popular CI-102’s “boat style” marker beacon antenna. The CI 118-1 is approved for medium to high performance single, turbo-prop, or jet aircraft and provides simple external mounting. DC grounded to minimize accumulation of precipitation static.
CI 118-9 MARKER BEACON ANTENNA/BNC Connector, 75 MHz, Airspeed 400 Knots
CI 118-9 marker beacon is identical to the CI 118 except the mounting configuration allows for “drop-in” replacement to the Honeywell Bendix-King KA 26 marker beacon. This design by Comant has been test to the tough DO-160D environment standards. DC grounded to minimize accumulation of precipitation static.
MARKER BEACON ANTENNA/High Speed Blade, 4 Hole Mount
MARKER BEACON ANTENNA/Flush mount, OEM on Dassault
The CI 165-1 is a lightweight, flush mount antenna that provides dual marker beacon signal outputs at the antenna to eliminate the need for a separate marker beacon splitter. Housed in an aluminum cover with a glass laminate cover, internal components are potted in place insuring mechanical integrity. The CI 165 is design for flat surface mounting on most aircraft including business jets.
104-12 Monopole Transponder Antenna | 1030 – 1090 MHz
The 104-12 transponder antenna is a mono-pole antenna that has a top loaded sphere which creates a factor of reliability and safety for a shorter antenna. This antenna offers a voltage standing wave ratio of 1.2:1 at 1,090 MHz and less than 2:1 at 1,030 MHz when connected with a 50Ω coaxial transmission line. The 104 series antennas feature an omni-directional, vertical-polarize radiation pattern when mounted to the underside of the aircraft.
104-17 Monopole Transponder Antenna | 978 MHz
The 104-17 transponder antenna is a mono-pole antenna that has a top loaded sphere which creates a factor of reliability and safety for a shorter antenna. This antenna offers a voltage standing wave ratio of 1.7:1 at 978 MHz when connected with a 50Ω coaxial transmission line. The 104 series antennas feature an omni-directional, vertical-polarize radiation pattern when mounted to the underside of the aircraft.
CI 101 TRANSPONDER STUB ANTENNA/BNC Female Connector, 1030-1090 MHz, 50 Ohms, Airspeed 300 Knots, & a Tin-Nickel Alloy Finish
The CI 101 is a top loaded stub, monopole, transponder antenna with a mechanically captivated radiator machined from solid brass for impact resistance. Contact power are made from beryllium copper, and metallic parts are plated with bright nickel for corrosion protection. The CI-101 mounts through a single 0.6-inch diameter hole.
AT-741B/B Identification Beacon Antenna | 960-1220 MHz
The AT-741B/B antenna is designed for use with Radar Interrogation. Constructed from an aluminum casting provides protection from particle erosion of speeds of up to Mach 2. This antenna is produced to Military Specifications MIL-DTL-25708 and is qualified environmentally to Military Standard MIL-STD-810. The AT-741/B/B can withstand a static load of 15 psi perpendicular to the blade, operate at altitudes of 100,000 ft, and has a Skydrol resistant lusterless CARC black coating.
CI 105-17-L ADS-B/UAT Antenna | TNC
The CI 105-17L is a single port ADS-B, TIS-B, and UAT antenna. This antenna meets the ADS-B FAA requirements. The CI 105-17L is capable of both IN and OUT processing. This single connector blade antenna can be used for ADS-B, TIS-B, UAT, DME or ATCRBS Transponder, plus Mode S. The CI 105-17-L use a standard 6-hole mounting pattern.
NI24 L-band Antenna | HN Connector, 6-hole Mount
The NI24 L-Band blade antenna is designed and manufactured with the radiating element encapsulated in an epoxy dialectic body using a transfer-molded process making them well suited for commercial and military aircraft applications. This economical and rugged construction provides a unified design while preventing moisture penetration in humid conditions. This antenna can be used with DME, IFF, TACAN, TELEMETRY, and Beacon equipment.
