MODULAR REMOTE SWITCH/14V + False

The RS08/12/16/24 family of remote switches allow large numbers of data or audio lines to be transferred with a single ground logic level. 14 VDC or 28 VDC operation is supported and the RS08 series features automatic ILS reversion logic. The RS16 series offers the ability to provide switching functions with either voltage or ground keying up to 35,000'. The RS16 features independent ILS reversion logic switch and each 4 pole relay supports a status annunciator for fault monitoring. Dry nitrogen filled, gold contact sealed relays provide dry circuit to 0.5 A switching range.

Call for Pricing

Contact Cost Aero at 855-500-3044 for pricing

Modular Remote Switch/28V

$3,651.25
The RS16 is a bulkhead mounted, user definable, remote switch used to switch sixteen signals as one group or as

MOLEX EXTRACTION TOOL

$31.62
This Molex extraction tool removes Micro-Fit electrical contacts from connectors.

MOLEX EXTRACTION TOOL/For use with 24-18 gauge wire

$51.00
This Molex extractor tool is designed to extract different terminal series from various plug and receptacle housings.

Molex Extraction Tools | 0.062 terminals

$14.70
The W-HT-2285 extractor tool is for the removal of 1.57 mm (0.062 in) diameter series pin and socket, male and female terminals in both plugs and sockets.

Molex Extraction Tools | 0.093 terminals

$14.70
The W-HT-2038 extractor tool is for the removal of 0.093-inch diameter series pin and socket, male and female terminals in both plugs and sockets.

MOLEX HAND CRIMP TOOL/For use with 14-24 gauge wire

$45.00
Molex hand crimp tool that also cuts and strips wire and cuts bolts. 8.25 inches in length with a red handle.

MOLEX HTR1719 COMM.CRIMP TOOL

The GMT202 hand tool is used for crimping Molex 0.062-inch diameter standard pin and socket terminals, KK, Flat Blade, Pitch Crimp connectors for wire sizes 24 to 18 gauge.

Contact Cost Aero at 855-500-3044 for pricing

MOLEX MANUAL EXTRACTION TOOL

$28.38
This Molex extraction tool removes standard EconoLatch® pin & socket crimp terminals with a diameter of 0.062 inches. 

MOLLE Base Plate

$17.00
A simple panel covered with standard MOLLE grid using one-inch nylon webbing. This base plate will accept any standard MOLLE accessory and then store the collection directly inside any FLEX Center Section.