1/4″ Vent Tubing
$9.75
Tubing for the EarthX ETX900-VNT or the ETX900-TSO vented batteries. Only EarthX approved or supplied tubing should be used. The tubing is chemical resistant and rated for 500°F. Be careful not to crush or restrict flow through the tubing. Enter the quantity you want in feet.
1/4″ inside diameter, 5/16″ outside diameter
Out of stock
to the hacker who uses this to check credit cards, go away, and dont come back.
Tubing for the EarthX ETX900-VNT or the ETX900-TSO vented batteries. Only EarthX approved or supplied tubing should be used. The tubing is chemical resistant and rated for 500°F. Be careful not to crush or restrict flow through the tubing. Enter the quantity you want in feet.
1/4″ inside diameter, 5/16″ outside diameter
| Weight | 0.1 lbs |
|---|---|
| Dimensions | 0.1 × 0.1 × 0.1 in |
| Brand | EarthX Batteries |
You must be logged in to post a review.
SHIPPING INFORMATION
We can ship by UPS, or USPS and DHL Express. We ship nationally, and internationally.
Carriers In Use
SHIPPING COSTS
- International Shipping Quote has to be done manually due to dimensions, weight, end destination, and more. Please E-Mail us.
- Any manner or method is available, call if you need Priority 1-2 day or overnight shipping.
- We are shipping with UPS or USPS and DHL Express
Related products
BB-TH-CO Thermal Battery Box “C” Case
Thermal battery box to protect from radiated or convection heat. Compatible with our existing “C” case battery models; ETX680C.
The EarthX thermal battery box is designed to protect the battery in engine compartment installations from periods of high temperature (up to 1 hour), such as after shutdown, and from radiant heat from hot surfaces like exhaust systems during and after flight. This stainless-steel box has a mirror finish to minimize the effect of radiant heat, and it has a high-performance insulating foam layer between the box and battery to reduce effect of convection heat. This battery box was engineered to be strong enough to withstand 30 G of force yet only weighs .375Kg or 13.2oz.
All batteries have optimal temperature ranges for use in operation. The ETX-Hundred series is rated for 140 deg F ( 60 deg C) or less for optimal longevity and performance of the battery. Typical lead acid batteries are rated to 113 deg F or 45 deg C.
Vent Port Kit
This kit includes includes machined aluminum vent port, washer and nut to make the installation of a vented EarthX battery easy and professional looking. This vent port is designed for our ETX900-VNT battery. This custom machined port is designed to accept the ETX900’s ¼” O.D. vent tubes. The port is an anodized aircraft aluminum. The two vent tubes easily connect to the port with a “push-to-connect” connection like most small diameter tube fittings on the market today.
This port can be incorporated into most new or existing aircraft builds, making a clean, low profile finish.
Hole size required in aircraft skin for port is 1 1/8”.
ETX-QCC2 24″ EarthX Quick Connect Cables
SPECIFICATIONS
- Max jump start amps: 400 amps
- Length: Battery “pigtail” cable = 24”/60 cm
- Jump pack adapter cable: 6.5”/16.5 cm
- 1/4″ / M6 ringlets
- Industry standard 2-pole SAE connector, with rubber sealing cap.
- Cable max. rating: 400 Amp
When not in use, keep rubber sealing cap closed on the SAE connector end.
You can then use this pigtail to charge your battery or for jump starting.
If the cables get hot, disconnect and allow them to cool down before use.
Caution: Never use the supplied battery chargers pigtail cables that comes with your charger for jump starting as they are not designed to carry this amount of amperage. Only use the EarthX quick connect (model #ETX-QCC2) cables to jump the battery.
Adapter-ABF (Terminal Adapter Designed For A, B, And F Cases)
This terminal adapter kit comes with 2 brackets and 2 screws for the positive and negative posts with the standard size of 6mm and makes for an easy installation when your motor sports vehicle requires a side or front mounted battery cable versus top mounting. Fits all A, B, and F cases.
Comes included with the following batteries: ETX18B and ETX18F.
Reviews
There are no reviews yet.