Category – Avionics – Antennas
CI 271 UHF ANTENNA/BNC Female Connector, 400-430 MHz, 50 Ohms, 50 Watts, Airspeed 250 Knots
CI-502 Antenna Coupler | Dual VOR, BNC
RAMI AV-17 Airborne Communications | VHF
The AV-17 is a general aviation antenna designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications. It has a 4-bolt mounting base and is low in profile. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.66 lb @ 250 mph. This antenna is a direct replacement for the CI 122.
VHF Communications Antenna | 118-137 MHz, 4 Hole Mount, BNC Female Connector, Gloss Black
The AV-17 is designed specifically for mounting to the underside of an aircraft, providing an excellent radiation pattern for air-to-ground communications. It has a 4-bolt mounting base and is low in profile. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 0.66 lb @ 250 mph. This antenna is a direct replacement for the CI 122.
This VHF communications antenna has a gloss black finish.
CI 503 GS ANTENNA COUPLER/BNC Female Connector, 329-335 MHz, 50 Ohms
RAMI AV-21 Special Use | UHF
RAMI AV-532L VOR/LOC/GS Receive Only Antenna
The AV-532L is a VOR/LOC/GS receive only antenna. It consists of taper ground high-strength 17-7PH stainless steel elements to reliably withstand vibration and wind loads. The insulators are weather-sealed compression-molded bakelite with the mounting holes provided. The unit may be mounted with the V pointed either forward or aft. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 ft. It has a drag force of 3.42 lb @ 250 mph. A 30 foot transmission line with integral balun is also supplied.
CI 102 MARKER BEACON ANTENNA /BNC Connector, 75 Mhz, 50 Ohms, 4 hole internal mount, Airspeed 400 Knots. Includes gasket C10208, & a White Finish
The CI 102 marker beacon antenna is designed for use with modern, high sensitivity marker beacon receivers. Small and lightweight, this marker beacon features 4-hole internal mounting for simple installation. The antenna assembly is enclosed in an injection molded radome which is impervious to the tough environments typical of the underside of an aircraft. DC grounded to minimize accumulation of precipitation static.
MARKER BEACON ANTENNA COUPLER/BNC Female Connector, 75 MHz, 50 Ohms
RAMI AV-3 Ground Vehicular | VHF Communications
The AV-3 is a general aviation, low profile, snap-in mounting quarterwave antenna for use on ground vehicles. It has a solderless cable connection at the antenna and is supplied with 17 ft. of cable and a PL-529 connector. The antenna is field tunable by simply cutting the whip to the required length.
VHF Communications Antenna | 118-137 MHz, 4-Bolt Mount, BNC Female Connector, Gloss Black
The AV-10 VHF communications antenna is designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base. The antenna essentially matches the styling of the communication antenna currently used on most single and light twins. The antenna is designed to operate at speeds up to 350 mph and altitudes up to 50,000 feet. It has a drag force of 2.70 lbs @ 250 mph. This antenna is a direct replacement for the CI 121.
This antenna comes in gloss black.
DME TRANSPONDER ANTENNA/BNC Female Connector, Extended 2 Stud Mount, .70 Stud Length, 960-1220 MHz and 1030-1090 MHz, 50 Ohms, Airspeed 400 Knots & a White Finish
The CI 105-16 is a broadband and rugged antenna designed for DME or transponder use. The antenna assembly is designed specifically as a replacement for the Honeywell Bendix-King KA60 and offers an extended length, two-stud mounting that is found on the KA60. It includes a BNC connector and covers 960 MHz to 1220 MHz frequencies and is rated to 400 Knots TAS at 70,000 feet.
RAMI AV-5 Base Station | VHF
The AV-5 is an economical Ground Plane base station antenna for general aviation. It is ideally suited for use with Unicom transceivers and is field tunable to optimize VSWR at desired frequency. Durably constructed of high quality materials for a long operational life, the antenna is designed to withstand wind speeds up to 100 mph.
RAMI AV-587 Antenna Accessories | Diplexer, Splitter
