Category – Avionics – Antennas
DM C70-4 VHF Broadband Antenna | 360/720 Channel, Bent Rod, 8.9in tall
The C70 series VHF communications antennas are designed for top or bottom installations on high-performance, single or twin, and turbo engine for fixed and rotary wing aircraft. The C70 series antennas offer mechanical strength and high-electrical efficiency to provide reliability at full 360/720 channel transceiver operations. Its lightweight profile is unobtrusive, resistant to icing, and offers a low drag profile.
The C70-4 supersedes the C70-2 and is specifically designed for bottom installations and designed with a higher degree of efficiency
CI 1085-20-L Multi-Function VHF/L Band Antenna | Dual Port, Edge Protection
The CI-1085-20L is a dual port, multi-function VHF/UHF antenna that uses a popular footprint to contains ATCRBS Mode S transponder/ DME/UAT, ADS-B, and VHF frequencies in one radome and holds no less than five different FAA TSO approvals. This antenna is designed to be used on fixed-wing turbine power aircraft and some light jets.
CI 120-200G/S-L
The CI 120-200 VOR/LOC/GS navigation antenna set provides optimum VOR performance when used for area navigation. Antenna system qualified for use on single engine, twin, jet, and helicopter aircraft. The blades have leading edge protection and come with a rubber gasket enabling mounting on curved vertical stabilizers. This antenna also provides glideslope capability. Complete set includes a pair of two blades, each with single BNC connector output, and two coax interconnect cables. The dual output signal combiner is included (provides separate RF cable runs to the avionics installation for NAV1 and NAV2 receivers).
AT-1108ARC VHF/UHF Comm Antenna | 116-152 MHz
The AT-1108ARC Antenna is a combined VHF/UHF airborne communications blade antenna designed for usage airspeeds of less than Mach 1. The antenna housing is fiberglass epoxy, designed to withstand the exposure to sand and dust particles of desert areas and is foam-filled to reduce the effect of extreme temperature changes, extreme humidity, and excessive shock and vibration. The AT-1108ARC is produced to Military Specification MIL-A-55680 and has continuous operation altitudes of up to 50,000 ft and temperatures between -65°F and 131°F. It can withstand the impact shock of 30g and the steady-state acceleration of 6g. The isolation between the bands is > 40 dB. A gasket for RF shielding and positive sealing is included. The antenna is coated with a Skydrol resistant lusterless CARC black paint.
CI 120-200G/S VOR/LOC/GS Blade Antenna | Dual Output
VOR/LOC/GS navigation antenna set provides optimum VOR performance when used for area navigation. Antenna system qualified for use on single engine, twin, jet, and helicopter aircraft. Complete set includes two blades, each with BNC connector output, and two coax interconnect cables. Dual output signal combiner providing for separate RF cable runs to the avionics installation for NAV1 and NAV2 receivers is included.
CI 120 VOR/LOC/GS Blade Antenna | Single Output
The CI 120G/S VOR/LOC/GS navigation antenna set that provides optimum VOR performance when used for area navigation. The antenna system is qualified for use on single, twin, jet and helicopter aircraft, and also provides glide slope reception capability. The complete set includes two blade antenna, each with single BNC connector output, two coax interconnect cables and a signal combiner with single BNC connector output providing for a single cable run to the avionics installation.
CI-120-400 VOR GS BLADE ANTENNA/BNC Connector, 108-118 MHz and 329-335 MHz, 50 Ohms, Single Output Combiner, Airspeed 300 Knots
N4-17 VOR/LOC/GS Antenna | Single Radiating Element Only
The DM N4-17 VOR/LOC/Glide slope antenna is designed for general aviation, commercial, and military aircraft that operate up to Mach 1.0. DM N4-17 is designed to provide a low-cost, lightweight, and low-drag antenna for state-of-the-art avionics. This antenna's performance parameters exceeds environmental specifications of MIL-5400 Class 3 equipment; therefore, it can be installed on single engine to jet engine aircraft. The balanced loop design of the DM N4-17/N assures an omnidirectional radiation pattern at the horizon to obtain maximum signal for VOR and area navigation which provides more receiving distance and reliable system performance.
N48-1 Series Balanced Loop Antenna | VOR/LOC, 108-118 MHz
DM N25 Glide Slope Antenna | 329–335.3MHz, TNCf Connector
The N25 series of glide slope antenna use a grounded, center-fed loop as the radiating element, which produces the radiation patterns. This antenna is a dual connector that incorporates a hybrid; its circuitry effectively isolates the two associated receiving systems providing protection against disablement of both systems in the event of failure in one system. The radiation pattern associated with each DM N25-2 antenna port is identical, so that no coupler dropout problem occurs during automatic landing. All DM N25 series antennas provide complete lightening protection for the associated receivers. They are suitable for mounting either externally or within a nose radome.
110-337 Blade Antenna
Select options
This product has multiple variants. The options may be chosen on the product page
CI 2680-216 Combo Blade Antenna | VHF, XM Weather, BNC/TNC
PN19 Radio Altimeter Antenna | 4,200M–4,400MHz, ARINC 707
The PN19-1-1 uses micro strip technology to provide an extremely low-profile antenna. This fully functional antenna was developed to be a high quality, low-cost, lightweight, and near conformal antenna. The dielectric insert and radiating elements are recessed into a complete four-sided metal housing. This design feature protects the dielectric surface from the airstream for increased erosion protection in addition to preventing water intrusion and delamination.
CI 295-300 SAR TRI BAND ANTENNA/White, 136-174 MHz and 380-520 MHz and 764-870 MHz, Single Port
The CI 295-300 tri-band, single-port, airborne SAR antenna is designed to provide frequency coverage to Search and Rescue teams using Motorola’s APX® architecture. For maximum effectiveness and connectivity, the CI 295-300 operates within P25 standards. This blade antenna is rated for helicopter and fixed-wing turbine powered jet installations in the toughest vibration environments. The single-port design reduces installation time and saves space — providing room on the aircraft for other mission critical antennas or equipment vital to search and rescue operations.
