Category – Avionics – Electrical
DC POWER CONVERTER/DC to regulated and controllable DC power converter, 50-100 watt
The LT-52A is a pulse width-modulated DC to DC converter that provides regulated DC power. This converter transforms an unregulated 28 VDC to a regulated and adjustable DC voltage output via a remote control potentiometer.
The LT-52A is primarily designed to control the light intensity of incandescent bulbs in aircraft lighting. The LT-52Ais FAA TSO-C71 recognized for airborne applications.
RG28B DC–DC Power Converter | 28 VDC to Regulated 19 VDC, 14.7A
The RG28B power converter converts a 28 VDC input to a regulated 19 VDC output voltage. This converter is capable of delivering 280 continuous watts at 14 VDC (20A output). The 14 VDC output is buck converted from the input voltage; and therefore, the output voltage is not isolated from the input. A state of art "synchronous current mode switching" topology with surface mount technology facilitates the power conversion process. Control circuit with a synchronous PWM controller provides for voltage regulation and current limit. Circuit protection includes an output short circuit current limit and shuts down when the voltage feedback loop is opened.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
Multi-Volt DC Converter | Three Output, 9-32VDC Input
This Multi-volt DC converter is designed to operate lower current devices in a ruggedized airborne environment. Designed for 12 and 24 volt aircraft systems that need an ultra-small DC converter in various output voltages to power PED devices in aircraft, rotor-craft or military vehicles. It is also FAA-TSO approved and has been tested under DO160G.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
DC POWER CONVERTER/DC to regulated and controllable DC power converter, 75-120 watt. 300 ohm to 10K 1/2W potentiometer.
The LT-55A is a pulse width-modulated DC to DC converter that provides regulated high power DC. This converter transforms an unregulated 28 VDC to a regulated fixed or adjustable DC output via a remote control potentiometer.
The LT-55A is primarily designed to control the light intensity of incandescent bulbs in aircraft instrument lighting when requiring 0-15 amperes at 5 VDC output.
POWER CONVERTER/PA250 TO 400W
AC TO DC POWER SUPPLY/AC to regulated 28 Vdc power converter, 1200 watt
The WH120 DC power supply from KGS converts a 115/200 VAC, 4 wire Wye, 400 Hz, 3-phase input to a regulated 28 VDC up to 1,200 watt continuous output. This power supply features off-line rectification, a pulse width-modulated DC-to-DC step-down voltage converter, and a rugged, high power IGBT power module. The WH120 is designed for use with mobile and ground vehicle equipment and lighting systems that require a regulated 28 VDC power source.
7-163PIN160 Logic Converter Unit | Extended Temperature version
The 163PIN160 logic converter unit maintains continuity for broadband frequency hopping for secure V/UHF communications in high performing military aircraft. This unit allows radios to seamlessly integrate with antennas to maximize reliability and resilience of communications. Chelton's logic converters take frequency information from the radio and matches that to their tunable antennas.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
AC TO DC POWER SUPPLY/115V, 400Hz AC to regulated and controllable 280 watt DC output
The PH28 is a pulse width modulated ac to dc power converter that provides regulated 4-28 Vdc output with up to 10 amperes continuous output current. This converter is primarily designed for 115V/400 Hz aircraft systems to deliver variable 4 to 28 Vdc power to incandescent lamps or LED loads for airborne/ground instruments, navigation and electronic systems.The unit can also be used as a fixed output voltage source between 14 Vdc and 28 Vdc.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
KN72 UNIV LOC/VOR CONVERTER
The KN72 is a remote mounted VOR/LOC converter designed to operate with NAV receiver and VOR/LOC indicator to provide OMNI directional range or localizer information. Design features include improved VOR scalloping rejecting, versatile mounting, low power consumption, and externally adjustable VOR centering, localizer centering and course width.
FREQUENCY CONVERTER/3 phase 400 Hz to 1 phase 230 VAC
DC POWER CONVERTER/High powered regulated boost DC converter, 400 watt
The RHB40 is primarily designed for 28 Vdc buss systems to deliver regulated 24 Vdc power. The RHB40 will operate from an input voltage range of 12-24 Vdc (down to 8Vdc in abnormal mode) with continuous output current up to 16.6 amps and 190% overload current capability (31.5 amps).
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
DC-DC CONVERTER/30-56 VDC input voltage, 13.8 VDC output voltage, 18 Amps continuous current, 24 Amps peak current
DC POWER CONVERTER/DC to regulated DC power converter, 112W, KPT-06B-14-5S plug
The LT-71A is a pulse width-modulated DC to DC converter that provides regulated power.
The converter transforms an unregulated 28 VDC to a regulated and fixed DC output.
The Model LT-71A is primarily designed to supply regulated fixed DC voltage to critical communication, navigation and digital equipment.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
DC POWER CONVERTER/DC to regulated DC power converter, 112W, MS3106A14S-5S-X plug
The LT-71B is a pulse width-modulated DC to DC converter that provides regulated power.
The converter transforms an unregulated 28 VDC to a regulated and fixed DC output.
The Model LT-71B is primarily designed to supply regulated fixed DC voltage to critical communication, navigation and digital equipment.
Call for Pricing
Contact Cost Aero at 855-500-3044 for pricing
